We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SXWDL-MX33-[221-1959/1]
Description
Linear Guides/Heavy Load/Dust Resistant
Stock availability:
On request
If you are looking for MISUMI SXWDL-MX33-[221-1959/1], communicate with FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are symbolized in the quality of outcomes and special attention to each customer. We appreciate everyone, who collaborated with us - thus, our regular consumers get the most beneficial purchase conditions and discounts on the industrial equipment market. Now, there are more than 4500 such purchasers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Czech Republic, Slovenia, Sri Lanka, Luxembourg, Cuba, Burma, Burkina Faso, Austria, Antigua and Barbuda, Norway, Benin, Turkmenistan, Samoa, Philippines, Kenya, Kuwait, Slovakia, Mexico, Liechtenstein, Morocco, Australia, Guyana, Chile, Togo, Pakistan, Uruguay, Fiji, East Timor, The Bahamas, Malaysia, Laos, Seychelles, The Gambia, Switzerland, Estonia, Armenia, Panama, Sudan, Botswana, Thailand, Indonesia, China, Guatemala, Albania, Suriname, Syria, Brazil. A well-elaborated logistics system and a partnership network allow us to send our goods anywhere in the world as soon as possible without damaging product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this amount is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as keep on top of it.
To request or place an order, call us by phone or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Type | MX (Lubrication Units) | L Dimension | Number of Blocks | Material Hardness | ||
Double-Sealed | With Metal Scrapers | |||||
Standard Block | SXRD | SXRK | Blank: None -MX: Provided | Selectable | 1 | Carbon Steel 58HRC~ |
SX2RD | SX2RK | 2 | ||||
SXRDL | SXRKL | Configurable | 1 | |||
SX2RDL | SX2RKL | 2 | ||||
Wide Block | SXWD | SXWK | Selectable | 1 | ||
SX2WD | SX2WK | 2 | ||||
SXWDL | SXWKL | Configurable | 1 | |||
SX2WDL | SX2WKL | 2 |
Part Number | - | L | |
SXRD28 SXRD-MX28 SXRD28L SXRD28G | - - - - | 880 880 880 880 | (With Lubrication Units) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Guide Rail Dimension | ||||||||||||||||||||||
Type | MX | H | W | L1 | B | C | S | L2 | K | T | Cb | Grease Fitting | H1 | W1 | W2 | Ca | Counterbored Hole | F | G | ||||||
Standard | MX | Mounting Hole | E | T1 | d1?d2?h | ||||||||||||||||||||
Standard Block | (1 block) SXRD SXRK SXRDL SXRKL | (2 blocks) SX2RD SX2RK SX2RDL SX2RKL | Blank: None -MX: Provided | 24 | 160(220) ~1480 | 34 | 62 (58.6) | 71.6 (68.2) | 26 | 26 | M4x7 | 41 | 20 | 7 | 0.85 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 9.5 | 0.5 | 3.5x6x4.5 | 60 | 20 |
28 | 220 ~1960 | 42 | 73.4 (69) | 83 (78.6) | 32 | 32 | M5x8 | 47.6 | 22.5 | 7.5 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 11 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 220(280) ~1960 | 48 | 90 (85.4) | 99.6 (95) | 35 | 35 | M6x9 | 61 | 26.5 | 8 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 12.5 | 0.8 | 7x11x9 | 60 | 20 | ||||
Wide Block | (1 block) SXWD SXWK SXWDL SXWKL | (2 blocks) SX2WD SX2WK SX2WDL SX2WKL | 24 | 160(220) ~1480 | 52 | 62 (58.6) | 71.6 (68.2) | 41 | 26 | 4.5 | 41 | 20 | 7 | 0.5 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 18.5 | 0.5 | 3.5x6x4.5 | 60 | 20 | |
28 | 220 ~1960 | 59 | 73.4 (69) | 83 (78.6) | 49 | 32 | 5.5 | 47.6 | 22.5 | 9 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 19.5 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 220(280)~ 1960 | 73 | 90 (85.4) | 99.6 (95) | 60 | 35 | 7 | 61 | 26.5 | 10 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 25 | 0.8 | 7x11x9 | 60 | 20 |
H | Selectable L | Unit Price | |||||||
1 block | 2 blocks | ||||||||
SXRD | SXRK | SXWD | SXWK | SX2RD | SX2RK | SX2WD | SX2WK | ||
24 | 160 | - | - | - | - | ||||
220 | |||||||||
280 | |||||||||
340 | |||||||||
400 | |||||||||
460 | |||||||||
520 | |||||||||
580 | |||||||||
640 | |||||||||
700 | |||||||||
760 | |||||||||
820 | |||||||||
880 | |||||||||
940 | |||||||||
1000 | |||||||||
1120 | |||||||||
1240 | |||||||||
1360 | |||||||||
1480 | |||||||||
28 | 220 | ||||||||
280 | |||||||||
340 | |||||||||
400 | |||||||||
460 | |||||||||
520 | |||||||||
580 | |||||||||
640 | |||||||||
700 | |||||||||
760 | |||||||||
820 | |||||||||
880 | |||||||||
940 | |||||||||
1000 | |||||||||
1120 | |||||||||
1240 | |||||||||
1360 | |||||||||
1480 | |||||||||
1600 | |||||||||
1720 | |||||||||
1840 | |||||||||
1960 | |||||||||
33 | 220 | - | - | - | - | ||||
280 | |||||||||
340 | |||||||||
400 | |||||||||
460 | |||||||||
520 | |||||||||
580 | |||||||||
640 | |||||||||
700 | |||||||||
760 | |||||||||
820 | |||||||||
880 | |||||||||
940 | |||||||||
1000 | |||||||||
1120 | |||||||||
1240 | |||||||||
1360 | |||||||||
1480 | |||||||||
1600 | |||||||||
1720 | |||||||||
1840 | |||||||||
1960 |
H | Unit Price | |||||||
1 block | 2 blocks | |||||||
SXRDL | SXRKL | SXWDL | SXWKL | SX2RDL | SX2RKL | SX2WDL | SX2WKL | |
24 | ||||||||
28 | ||||||||
33 |
H | Unit Price | |
1 block | 2 blocks | |
24 | ||
28 | ||
33 |