We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SXSXC-D[1-3/0.1]-L[3-30/0.5]-E[0.5-2.5/0.5]
Description
Small Diameter/Flat/ Standard Tolerance
Stock availability:
On request
If you are seeking MISUMI SXSXC-D[1-3/0.1]-L[3-30/0.5]-E[0.5-2.5/0.5], reach FAMAGA, the world's primary supplier of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are depicted in the quality of outcomes and particular attention to each orderer. We respect everyone, who cooperated with us - therefore, our regular consumers get the most convenient purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such consumers, and we constantly sign new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Papua New Guinea, Bangladesh, El Salvador, The Bahamas, Poland, Antigua and Barbuda, Suriname, Algeria, Grenada, Nigeria, Moldova, Indonesia, Norway, Afghanistan, Peru, Brazil, Singapore, Iran, Costa Rica, Kenya, Japan, Australia, Egypt, Latvia, Fiji, Bolivia, Ecuador, United Arab Emirates, Finland, Libya, East Timor, Cameroon, Estonia, Ireland, South Korea, Israel, Botswana, Madagascar, The Gambia, Cyprus, Belize, Belarus, Swaziland, Comoros, Andorra, Vietnam, Turkey. A well-elaborated logistics bond and a partnership network allow us to deliver our products anywhere in the world immediately without damaging product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this amount is rising every day. We are happy that users choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as to stay on the top.
To ask a question or make a request, contact us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||||
Flat | Sphere | Tapered | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
?SK95 (ISO-TC90 Equiv.) | Treated Hardness: 50 ~ 58HRC | SFKT | SPKT | SXKT | SFST | SPST | STST | SXST | SFFPT | SPPT | STPT | SXFPT |
*EN 1.4301 Equiv. | - | SFKS | SPKS | SXKS | SFSS | SPSS | STSS | SXSS | SFPS | SPPS | STPS | SXFPS |
?EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | - | - | - | SFSXC | SPSXC | STSXC | SXSXC | SFPXC | SPPXC | STPXC | SXFPXC |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | - | - | SPSSG | - | - | - | - | - | - |
?EN 1.2344 Equiv. (SR Parts Polished) | Treated Hardness: 40 ~ 52HRC | - | - | - | - | SPSDG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKS | - | D1 | - | L5 |
Part Number | - | D | - | L | - | E | |
SPST SXST | - - | D1.5 D1.5 | - - | L8.5 L5.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | E | ||
Type | D Tol. | |||||||
SPPT SXFPT | P P | - - | D0.55 D2.82 | - - | L5.0 L5.0 | - | E2.5 | (Sphere) (Tapered) |
Part Number | D | d dim. Tolerance | L Selection | E | |||||||||
Flat SFKT SFKS | Sphere SPKT SPKS | Tapered SXKT SXKS | 1 | 0 -0.005 | 3 | 4 | 5 | 6 | 10 | 0.5 | |||
1.5 | 5 | 6 | 8 | ||||||||||
2 | 5 | 6 | 8 | 10 | 12 | 15 | |||||||
3 | 5 | 6 | 8 | 10 | 12 | 15 | 1 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFST SFSS SFSXC | Sphere SPST SPSS SPSXC SPSSG SPSDG | Taper R STST STSS STSXC | Tapered SXST SXSS SXSXC | 1.0~2.0 | 0 -0.005 | 3.0~30.0 | 0.5~2.5 | 0.2 |
2.1~3.0 | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | E 0.5mm Increment | R | ||||
Type | D Tolerance | |||||||
Flat SFFPT SFPS SFPXC | Sphere SPPT SPPS SPPXC | Taper R STPT STPS STPXC | Tapered SXFPT SXFPS SXFPXC | P +0.005 0 Q 0.002 R 0 -0.005 H 0 -0.01 | 0.50~1.00 | 3.0~30.0 | 0.5~2.5 | - |
1.01~2.00 | 3.0~30.0 | 0.2 | ||||||
2.01~3.00 | 0.4 |