We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SX2WTL28-[221-1959/1]
Description
Linear Guides/Heavy Load
Stock availability:
On request
If you are inspecting MISUMI SX2WTL28-[221-1959/1], communicate with FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are years of experience, which are symbolized in the quality of outcomes and individual attention to each buyer. We appreciate everyone, who conspired with us - thus, our regular customers accept the most beneficial purchase forms and discounts on the industrial equipment market. At this time, there are more than 3500 such clients, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Venezuela, Turkey, Monaco, The Bahamas, Burundi, United States, Liberia, Egypt, Greece, Kyrgyzstan, Laos, Burkina Faso, Montenegro, Singapore, Niger, United Arab Emirates, Vietnam, South Sudan, Syria, Guyana, Netherlands, Afghanistan, Guatemala, Argentina, Mauritania, Latvia, Mauritius, Philippines, Paraguay, East Timor, Jordan, Cyprus, Panama, Morocco, Albania, Brunei, Dominica, Bulgaria, Estonia, Hungary, Benin, Algeria, Georgia, Comoros. A well-developed logistics series and a partnership network let us to send our units anywhere in the earth quickly without undermining product quality.
A specific source of dignity for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this amount is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To consult or place an order, contact us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | MX (Lubrication Units) | L Dimension | Material Hardness | ||||
1 block | 2 blocks | ||||||
Standard Grade | High Grade | Standard Grade | High Grade | ||||
Standard Block | SXR | SXRJ | SX2R | SX2RJ | Blank: None -MX: Provided | Selectable | Carbon Steel 58HRC~ |
SXRL | SXRLJ | SX2RL | SX2RLJ | Configurable | |||
Wide Block | Through Hole | SXW | - | SX2W | - | Selectable | |
SXWL | SX2WL | Configurable | |||||
Tapped Hole | SXWT | SX2WT | Selectable | ||||
SXWTL | SX2WTL | Configurable |
Part Number | - | L | |
SXR28 SXR-MX28 RXR28 SXRL28L SXRL28G | - - - - - | 880 880 880 880 880 | (With Lubrication Units) (LTBC Plating) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Guide Rail Dimension | ||||||||||||||||||||||
Type | MX | H | W | L1 | B | C | Sx? | L2 | K | T | Cb | Grease Fitting | H1 | W1 | W2 | Ca | Counterbored Hole | F | G | ||||||
Standard | MX | Mounting Hole | E | T1 | d1xd2xh | ||||||||||||||||||||
Standard Block | (1 block) SXR SXRL SXRJ SXRLJ | (2 blocks) SX2R SX2RL SX2RJ SX2RLJ | Blank: None -MX: Provided | 24 | 100~1480 (160) | 34 | 57 | 66.6 | 26 | 26 | M4x7 | 41 | 20 | 7 | 0.85 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 9.5 | 0.5 | 3.5x6x4.5 | 60 | 20 |
28 | 160~1960 (220) | 42 | 67 | 76.6 | 32 | 32 | M5x8 | 47.6 | 22.5 | 7.5 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 11 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 48 | 83 | 92.6 | 35 | 35 | M6x9 | 61 | 26.5 | 8 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 12.5 | 0.8 | 7x11x9 | 60 | 20 | ||||
Wide Block | (1 block) SXW SXWL SXWT SXWTL | (2 blocks) SX2W SX2WL SX2WT SX2WTL | 24 | 100~1480 (160) | 52 | 57 | 66.6 | 41 | 26 | 4.5 (M5) | 41 | 20 | 7 | 0.5 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 18.5 | 0.5 | 3.5x6x4.5 | 60 | 20 | |
28 | 160~1960 (220) | 59 | 67 | 76.6 | 49 | 32 | 5.5 (M6) | 47.6 | 22.5 | 9 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 19.5 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 73 | 83 | 92.6 | 60 | 35 | 7 (M8) | 61 | 26.5 | 10 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 25 | 0.8 | 7x11x9 | 60 | 20 |
H | Selectable L | Unit Price | |||||
1 block | 2 blocks | ||||||
SXR | SXW | SXWT | SX2R | SX2W | SX2WT | ||
24 | 100 | - | - | - | |||
160 | |||||||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
*1120 | |||||||
*1240 | |||||||
*1360 | |||||||
*1480 | |||||||
28 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 | |||||||
33 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 |
H | Unit Price | |||||
1 block | 2 blocks | |||||
SXRL | SXWL | SXWTL | SX2RL | SX2WL | SX2WTL | |
24 | ||||||
28 | ||||||
33 |
H | Unit Price | |
1 block | 2 blocks | |
24 | ||
28 | ||
33 |