We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SX2WL28L-[221-1959/1]
Description
Linear Guides/Heavy Load
Stock availability:
On request
If you are pursuing MISUMI SX2WL28L-[221-1959/1], reach FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of items and private attention to each customer. We understand everyone, who collaborated with us - thus, our regular purchasers get the most attractive purchase terms and discounts on the industrial equipment market. At this time, there are more than 4500 such clients, and we constantly arrange new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the world Germany, United Kingdom, Sierra Leone, Croatia, Malaysia, Kenya, Italy, Afghanistan, Malta, Indonesia, Czech Republic, Australia, Canada, Israel, Bhutan, Swaziland, Equatorial Guinea, Montenegro, Finland, Samoa, The Bahamas, Gambia, Qatar, Syria, Madagascar, Austria, Brunei, East Timor, Angola, Cape Verde, Central African Republic, The Gambia, Ukraine, Peru, Albania, Belize, South Korea, Haiti, Jamaica, Algeria, Egypt, Turkey, Mexico, United Arab Emirates, Djibouti, Sweden. A well-shaped logistics chains and a partnership network guide us to conduct our items anywhere in the earth immediately without disreputing product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of industrial equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. Now, more than 10 million units of products have been delivered, and this amount is growing every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as keep on top of it.
To request or place an order, contact us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | MX (Lubrication Units) | L Dimension | Material Hardness | ||||
1 block | 2 blocks | ||||||
Standard Grade | High Grade | Standard Grade | High Grade | ||||
Standard Block | SXR | SXRJ | SX2R | SX2RJ | Blank: None -MX: Provided | Selectable | Carbon Steel 58HRC~ |
SXRL | SXRLJ | SX2RL | SX2RLJ | Configurable | |||
Wide Block | Through Hole | SXW | - | SX2W | - | Selectable | |
SXWL | SX2WL | Configurable | |||||
Tapped Hole | SXWT | SX2WT | Selectable | ||||
SXWTL | SX2WTL | Configurable |
Part Number | - | L | |
SXR28 SXR-MX28 RXR28 SXRL28L SXRL28G | - - - - - | 880 880 880 880 880 | (With Lubrication Units) (LTBC Plating) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Guide Rail Dimension | ||||||||||||||||||||||
Type | MX | H | W | L1 | B | C | Sx? | L2 | K | T | Cb | Grease Fitting | H1 | W1 | W2 | Ca | Counterbored Hole | F | G | ||||||
Standard | MX | Mounting Hole | E | T1 | d1xd2xh | ||||||||||||||||||||
Standard Block | (1 block) SXR SXRL SXRJ SXRLJ | (2 blocks) SX2R SX2RL SX2RJ SX2RLJ | Blank: None -MX: Provided | 24 | 100~1480 (160) | 34 | 57 | 66.6 | 26 | 26 | M4x7 | 41 | 20 | 7 | 0.85 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 9.5 | 0.5 | 3.5x6x4.5 | 60 | 20 |
28 | 160~1960 (220) | 42 | 67 | 76.6 | 32 | 32 | M5x8 | 47.6 | 22.5 | 7.5 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 11 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 48 | 83 | 92.6 | 35 | 35 | M6x9 | 61 | 26.5 | 8 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 12.5 | 0.8 | 7x11x9 | 60 | 20 | ||||
Wide Block | (1 block) SXW SXWL SXWT SXWTL | (2 blocks) SX2W SX2WL SX2WT SX2WTL | 24 | 100~1480 (160) | 52 | 57 | 66.6 | 41 | 26 | 4.5 (M5) | 41 | 20 | 7 | 0.5 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 18.5 | 0.5 | 3.5x6x4.5 | 60 | 20 | |
28 | 160~1960 (220) | 59 | 67 | 76.6 | 49 | 32 | 5.5 (M6) | 47.6 | 22.5 | 9 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 19.5 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 73 | 83 | 92.6 | 60 | 35 | 7 (M8) | 61 | 26.5 | 10 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 25 | 0.8 | 7x11x9 | 60 | 20 |
H | Selectable L | Unit Price | |||||
1 block | 2 blocks | ||||||
SXR | SXW | SXWT | SX2R | SX2W | SX2WT | ||
24 | 100 | - | - | - | |||
160 | |||||||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
*1120 | |||||||
*1240 | |||||||
*1360 | |||||||
*1480 | |||||||
28 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 | |||||||
33 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 |
H | Unit Price | |||||
1 block | 2 blocks | |||||
SXRL | SXWL | SXWTL | SX2RL | SX2WL | SX2WTL | |
24 | ||||||
28 | ||||||
33 |
H | Unit Price | |
1 block | 2 blocks | |
24 | ||
28 | ||
33 |