We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SX2WL28-[221-1959/1]
Description
Linear Guides/Heavy Load
Stock availability:
On request
If you are seeking MISUMI SX2WL28-[221-1959/1], communicate with FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are ages of experience, which are symbolized in the quality of outcomes and particular attention to each buyer. We appreciate everyone, who conspired with us - thus, our regular clients accept the most beneficial purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Bosnia and Herzegovina, Malaysia, Qatar, Ukraine, Dominican Republic, Latvia, North Korea, Brunei, Libya, New Zealand, Oman, Rwanda, Grenada, Kuwait, Algeria, Bulgaria, Samoa, Pakistan, Guyana, Uzbekistan, Cyprus, East Timor, Indonesia, Kazakhstan, Yemen, Mauritius, The Gambia, Estonia, Uganda, Georgia, Macedonia, Albania, Finland, Burundi, Poland, Zimbabwe, Philippines, Iraq, Mauritania, Thailand, Afghanistan, Vietnam, China, Dominica. A well-developed logistics network and a partnership network allow us to deliver our products anywhere in the planet immediately without discrediting product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of factory-made equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or make a request, call us by phone or send a message to the online chat on our site. You can also direct a list of the needful equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | MX (Lubrication Units) | L Dimension | Material Hardness | ||||
1 block | 2 blocks | ||||||
Standard Grade | High Grade | Standard Grade | High Grade | ||||
Standard Block | SXR | SXRJ | SX2R | SX2RJ | Blank: None -MX: Provided | Selectable | Carbon Steel 58HRC~ |
SXRL | SXRLJ | SX2RL | SX2RLJ | Configurable | |||
Wide Block | Through Hole | SXW | - | SX2W | - | Selectable | |
SXWL | SX2WL | Configurable | |||||
Tapped Hole | SXWT | SX2WT | Selectable | ||||
SXWTL | SX2WTL | Configurable |
Part Number | - | L | |
SXR28 SXR-MX28 RXR28 SXRL28L SXRL28G | - - - - - | 880 880 880 880 880 | (With Lubrication Units) (LTBC Plating) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Guide Rail Dimension | ||||||||||||||||||||||
Type | MX | H | W | L1 | B | C | Sx? | L2 | K | T | Cb | Grease Fitting | H1 | W1 | W2 | Ca | Counterbored Hole | F | G | ||||||
Standard | MX | Mounting Hole | E | T1 | d1xd2xh | ||||||||||||||||||||
Standard Block | (1 block) SXR SXRL SXRJ SXRLJ | (2 blocks) SX2R SX2RL SX2RJ SX2RLJ | Blank: None -MX: Provided | 24 | 100~1480 (160) | 34 | 57 | 66.6 | 26 | 26 | M4x7 | 41 | 20 | 7 | 0.85 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 9.5 | 0.5 | 3.5x6x4.5 | 60 | 20 |
28 | 160~1960 (220) | 42 | 67 | 76.6 | 32 | 32 | M5x8 | 47.6 | 22.5 | 7.5 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 11 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 48 | 83 | 92.6 | 35 | 35 | M6x9 | 61 | 26.5 | 8 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 12.5 | 0.8 | 7x11x9 | 60 | 20 | ||||
Wide Block | (1 block) SXW SXWL SXWT SXWTL | (2 blocks) SX2W SX2WL SX2WT SX2WTL | 24 | 100~1480 (160) | 52 | 57 | 66.6 | 41 | 26 | 4.5 (M5) | 41 | 20 | 7 | 0.5 | M5xP0.8 | 6 | 5 | 12.5 | 15 | 18.5 | 0.5 | 3.5x6x4.5 | 60 | 20 | |
28 | 160~1960 (220) | 59 | 67 | 76.6 | 49 | 32 | 5.5 (M6) | 47.6 | 22.5 | 9 | 1 | M6xP0.75 | 13 | 6 | 15.5 | 20 | 19.5 | 0.6 | 6x9.5x8.5 | 60 | 20 | ||||
33 | 160~1960 (220) | 73 | 83 | 92.6 | 60 | 35 | 7 (M8) | 61 | 26.5 | 10 | 1 | M6xP0.75 | 13 | 6.8 | 18 | 23 | 25 | 0.8 | 7x11x9 | 60 | 20 |
H | Selectable L | Unit Price | |||||
1 block | 2 blocks | ||||||
SXR | SXW | SXWT | SX2R | SX2W | SX2WT | ||
24 | 100 | - | - | - | |||
160 | |||||||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
*1120 | |||||||
*1240 | |||||||
*1360 | |||||||
*1480 | |||||||
28 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 | |||||||
33 | 160 | - | - | - | |||
220 | |||||||
280 | |||||||
340 | |||||||
400 | |||||||
460 | |||||||
520 | |||||||
580 | |||||||
640 | |||||||
700 | |||||||
760 | |||||||
820 | |||||||
880 | |||||||
940 | |||||||
1000 | |||||||
1120 | |||||||
1240 | |||||||
*1360 | |||||||
*1480 | |||||||
*1600 | |||||||
*1720 | |||||||
*1840 | |||||||
*1960 |
H | Unit Price | |||||
1 block | 2 blocks | |||||
SXRL | SXWL | SXWTL | SX2RL | SX2WL | SX2WTL | |
24 | ||||||
28 | ||||||
33 |
H | Unit Price | |
1 block | 2 blocks | |
24 | ||
28 | ||
33 |