We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
STPSR-D[1.01-3/0.01]-L[3-30/0.1]
Description
Small Diameter/Flat/ Standard Tolerance
Stock availability:
On request
If you are looking for MISUMI STPSR-D[1.01-3/0.01]-L[3-30/0.1], catch up with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of outcomes and personalseparate attention to each customer. We esteem everyone, who worked with us - hence, our regular buyers get the most helpful purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such buyers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Cameroon, Austria, Czech Republic, Turkmenistan, El Salvador, Australia, Haiti, Greece, Antigua and Barbuda, United Arab Emirates, Iraq, Congo, Iran, Lithuania, Namibia, Tajikistan, Montenegro, Sudan, Philippines, Central African Republic, Seychelles, Bhutan, Ireland, Macedonia, Hungary, Liberia, Israel, Denmark, Panama, Brazil, Ecuador, Nigeria, Comoros, Algeria, Malaysia, Mongolia, Jamaica, Ghana, Croatia, India, Norway, New Zealand, Andorra, Malta, Libya, Turkey, Benin. A advanced logistics bond and a partnership network allow us to conduct our products anywhere in the earth quickly without damaging product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We call into our team only professionals, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. Now, more than 10 million units of products have been supplied, and this amount is increasing every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as to stay on the top.
To consult or book, phone us or send a message to the online chat on our site. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||||
Flat | Sphere | Tapered | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
?SK95 (ISO-TC90 Equiv.) | Treated Hardness: 50 ~ 58HRC | SFKT | SPKT | SXKT | SFST | SPST | STST | SXST | SFFPT | SPPT | STPT | SXFPT |
*EN 1.4301 Equiv. | - | SFKS | SPKS | SXKS | SFSS | SPSS | STSS | SXSS | SFPS | SPPS | STPS | SXFPS |
?EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | - | - | - | SFSXC | SPSXC | STSXC | SXSXC | SFPXC | SPPXC | STPXC | SXFPXC |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | - | - | SPSSG | - | - | - | - | - | - |
?EN 1.2344 Equiv. (SR Parts Polished) | Treated Hardness: 40 ~ 52HRC | - | - | - | - | SPSDG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKS | - | D1 | - | L5 |
Part Number | - | D | - | L | - | E | |
SPST SXST | - - | D1.5 D1.5 | - - | L8.5 L5.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | E | ||
Type | D Tol. | |||||||
SPPT SXFPT | P P | - - | D0.55 D2.82 | - - | L5.0 L5.0 | - | E2.5 | (Sphere) (Tapered) |
Part Number | D | d dim. Tolerance | L Selection | E | |||||||||
Flat SFKT SFKS | Sphere SPKT SPKS | Tapered SXKT SXKS | 1 | 0 -0.005 | 3 | 4 | 5 | 6 | 10 | 0.5 | |||
1.5 | 5 | 6 | 8 | ||||||||||
2 | 5 | 6 | 8 | 10 | 12 | 15 | |||||||
3 | 5 | 6 | 8 | 10 | 12 | 15 | 1 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFST SFSS SFSXC | Sphere SPST SPSS SPSXC SPSSG SPSDG | Taper R STST STSS STSXC | Tapered SXST SXSS SXSXC | 1.0~2.0 | 0 -0.005 | 3.0~30.0 | 0.5~2.5 | 0.2 |
2.1~3.0 | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | E 0.5mm Increment | R | ||||
Type | D Tolerance | |||||||
Flat SFFPT SFPS SFPXC | Sphere SPPT SPPS SPPXC | Taper R STPT STPS STPXC | Tapered SXFPT SXFPS SXFPXC | P +0.005 0 Q 0.002 R 0 -0.005 H 0 -0.01 | 0.50~1.00 | 3.0~30.0 | 0.5~2.5 | - |
1.01~2.00 | 3.0~30.0 | 0.2 | ||||||
2.01~3.00 | 0.4 |