We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI SSTCA12-60, get in touch with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has existed for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and personalseparate attention to each purchaser. We understand everyone, who worked with us - therefore, our regular consumers receive the most flexible purchase forms and discounts on the industrial equipment market. At this time, there are more than 4 thousand such clients, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Benin, Italy, Lesotho, Samoa, Fiji, Qatar, Sri Lanka, Malawi, Madagascar, Uganda, Singapore, Guinea, Andorra, Ireland, Tunisia, Indonesia, Guatemala, Bulgaria, Russia, Bolivia, Poland, Latvia, The Bahamas, Botswana, Niger, Morocco, Tanzania, Mauritius, Austria, South Korea, Seychelles, Kuwait, Guyana, Togo, Kyrgyzstan, Kiribati, Mozambique, East Timor, Georgia, Panama, Ecuador, Mexico, North Korea, Estonia, Tajikistan, Serbia, Costa Rica, Cyprus, Uruguay. A well-built logistics system and a partnership network assist us to dispatch our goods anywhere in the planet on-time without discrediting product quality.
A specific source of good name for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this number is rising every day. We are happy that clients choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To get some advice or make a request, call us by phone or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Locating Bolts | Accessory (Nut 1 pc.) | |||||
Round Tip | Material | Hardness* | Surface Treatment | Material | Surface Treatment | |
Fine | STCA | EN 1.1191 Equiv. | 45HRC~ | Black Oxide | EN 1.0038 Equiv. | Bright Chromate Plating |
STCAM | Electroless Nickel Plating | Trivalent Chromate | ||||
SSTCA | EN 1.4125 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - | |
Coarse | STBA | EN 1.1191 Equiv. | 45HRC~ | Black Oxide | EN 1.0038 Equiv. | Bright Chromate Plating |
STBAM | Electroless Nickel Plating | Trivalent Chromate | ||||
STBAS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
SSTBA | EN 1.4125 Equiv. | 45HRC~ | - |
Part Number | - | L |
STCB6 STBA10 | - - | 20 50 |
M | T (Coarse) | T1 (Fine) |
4 | 3.2 | 4 |
5 | 4 | |
6 | 5 | |
8 | 6.5 | 5 |
10 | 8 | 6 |
12 | 10 | |
16 | 13 | 8 |
M | MxPitch | B | (C) | H | (?1) | (r) | Z | d | SR1 | |
Fine | Coarse | |||||||||
4 | 4x0.5 | 4x0.7 | 7 | 8.1 | 2.8 | 2.1 | 0.2 | 3 | 2 | 3 |
5 | 5x0.5 | 5x0.8 | 8 | 9.2 | 3.5 | 2.4 | 3 | 4 | ||
6 | 6x0.75 | 6x1.0 | 10 | 11.5 | 4 | 3.0 | 0.3 | 3.5 | 4.5 | |
8 | 8x0.75 | 8x1.25 | 13 | 15.0 | 5.5 | 3.7 | 0.4 | 5 | 6 | 5 |
10 | 10x1.0 | 10x1.5 | 17 | 19.6 | 7 | 4.5 | 0.5 | 5.5 | 7 | |
12 | 12x1.0 | 12x1.75 | 19 | 21.9 | 8 | 5.2 | 7 | 9 | 8 | |
16 | 16x1.5 | 16x2.0 | 24 | 27.7 | 10 | 6 | 0.6 | 9 | 12 | 10 |
Part Number | L Selection | STCA, STBA | STCAM, STBAM | STBAS | SSTCA, SSTBA | |||||||||||||||||||||||
Type | M | STCA, STBA | STCAM, SSTCA, STBAM STBAS, SSTBA | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||||||
1 ~ 3 pc(s). | 4 ~ 49 pcs. | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||||||||||||
(Fine) STCA STCAM SSTCA (Coarse) STBA STBAM STBAS SSTBA | ?4 | 15 | 20 | 25 | 30 | 35 | 40 | 20 | ||||||||||||||||||||
?5 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 20 | ||||||||||||||||||||
?6 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 20 | 25 | 30 | 40 | 50 | ||||||||||||||||
?8 | 15 | 20 | 25 | 30 | 35 | 40 | 50 | 60 | 70 | 80 | 25 | 30 | 40 | 50 | 60 | |||||||||||||
10 | 30 | 35 | 40 | 50 | 60 | 70 | 80 | 30 | 40 | 50 | 60 | 70 | ||||||||||||||||
12 | 30 | 35 | 40 | 50 | 60 | 70 | 80 | 40 | 50 | 60 | 70 | 80 | ||||||||||||||||
16 | 50 | 60 | 70 | 80 | - | - | - | - |