We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SSHXN4-P[3-5/0.1]-Q[2-6/0.01]-K[0-8/1]-L[10-60/0.01]-B[2-10/0.1]
Description
Support Pins/Press Fit/Tapped/Threaded
Stock availability:
On request
If you are looking for MISUMI SSHXN4-P[3-5/0.1]-Q[2-6/0.01]-K[0-8/1]-L[10-60/0.01]-B[2-10/0.1], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are depicted in the quality of items and personalseparate attention to each buyer. We respect everyone, who liased with us - so, our regular buyers procure the most beneficial purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly compose new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Panama, Tajikistan, Canada, Afghanistan, Rwanda, Liechtenstein, Estonia, Gambia, Poland, Finland, Libya, Jamaica, United Arab Emirates, Australia, South Korea, Latvia, Guyana, Mexico, Israel, East Timor, India, Japan, Iran, Zimbabwe, Malaysia, Benin, New Zealand, Qatar, Slovakia, Syria, Tonga, Peru, Ireland, Iceland, El Salvador, Brazil, Brunei, Indonesia, Pakistan, Kuwait, Nepal, Namibia, Comoros, Samoa. A advanced logistics link and a partnership network assist us to conduct our units anywhere in the earth with no delay without undermining product quality.
A particular source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this number is amounting every day. We are happy that users choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or order, call us by phone or send a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||||
Straight | Shouldered | |||||||
Press Fit | Tapped | Threaded | Press Fit | Tapped | Threaded | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | SHFJ | SHFU | SHFN | - | SHXU | SHXN |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GSHFJ | GSHFU | GSHFN | GSHXJ | - | - |
EN 1.4301 Equiv. | - | - | SSHFJ | SSHFU | SSHFN | - | - | SSHXN |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CSHFJ | CSHFU | CSHFN | CSHXJ | CSHXU | CSHXN |
Part Number | - | P | - | Q | - | K | - | L | - | B |
SHFJ5 | - | P6.0 | - | Q4.50 | - | K5 | - | L30.55 | - | B3.2 |
D | H | M (Coarse) | M1 (Coarse) | m |
3 | 6 | M3 | - | 1 |
4 | M4 | |||
5 | 8 | M5 | ||
6 | M6 | M3 | 2 | |
8 | 11 | M8 | M4 | |
10 | 13 | M10 | M5 | 3 |
12 | 15 | M12 |
M (Coarse) | Tightening Torque |
N cm | |
M3 | ?147 |
M4 | ?333 |
M5 | ?676 |
M6 | 1156 |
M8 | 2803 |
M10 | 5557 |
M12 | 9702 |
Part Number | P | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | 0.1mm Increment | SHFJ | GSHFJ | SSHFJ | CSHFJ | GSHXJ | CSHXJ | ||||||
Straight | Shouldered | |||||||||||||
Straight SHFJ GSHFJ SSHFJ CSHFJ | Shouldered GSHXJ CSHXJ | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 3~6 | 10.00~60.00 | 2.0~5.0 | ||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 4~8 | 10.00~60.00 | 2.0~10.0 | ||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 5~10 | 10.00~60.00 | 2.0~10.0 | ||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||||
8 | 9.0~13.0 | 5.0~8.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | SHFU | GSHFU | SSHFU | CSHFU | SHXU | CSHXU | |||||||
Straight | Shouldered | |||||||||||||
Straight SHFU GSHFU SSHFU CSHFU | Shouldered SHXU CSHXU | 6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | ||||||||
Type | D | SHFN | GSHFN | SSHFN | CSHFN | SHXN | SSHXN | CSHXN | |||||||
Straight | Shouldered | ||||||||||||||
Straight SHFN GSHFN SSHFN CSHFN | Shouldered SHXN SSHXN CSHXN | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 0~6 | 10.00~60.00 | 2.0~5.0 | |||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 0~8 | 10.00~60.00 | 2.0~10.0 | |||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 0~10 | 10.00~60.00 | 2.0~10.0 | |||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 0~12 | 10.00~80.00 | 2.0~12.0 | |||||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 0~16 | 10.00~80.00 | 2.0~15.0 | |||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 0~20 | 10.00~100.00 | 2.0~20.0 | |||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 0~24 | 10.00~100.00 | 2.0~20.0 |