We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SSHFJ10-P[11-15/0.1]-Q[5-14/0.01]-K[10-20/1]-L[10-100/0.01]-B[2-20/0.1]
Description
Support Pins/Press Fit/Tapped/Threaded
Stock availability:
On request
If you are pursuing MISUMI SSHFJ10-P[11-15/0.1]-Q[5-14/0.01]-K[10-20/1]-L[10-100/0.01]-B[2-20/0.1], catch up with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of merchandises and special attention to each purchaser. We understand everyone, who cooperated with us - hence, our regular consumers bring in the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such consumers, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Zambia, Belize, Bangladesh, Slovenia, Nepal, Guinea, Canada, Panama, Slovakia, Malaysia, Australia, Kyrgyzstan, Sweden, India, Lithuania, Bhutan, Iran, Sudan, Andorra, Uganda, Kuwait, Guatemala, Malta, Chad, Japan, Tunisia, Iceland, Austria, Liechtenstein, Mongolia, Brunei, Jordan, Serbia, Israel, Ghana, Belarus, Kenya, Madagascar, Iraq, Algeria, Libya, Angola, Antigua and Barbuda, Mexico, Central African Republic, Czech Republic. A well-developed logistics system and a partnership network assist us to deliver our units anywhere in the planet with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is growing every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as to stay on the top.
To consult or book, get in touch with us or send a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||||
Straight | Shouldered | |||||||
Press Fit | Tapped | Threaded | Press Fit | Tapped | Threaded | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | SHFJ | SHFU | SHFN | - | SHXU | SHXN |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GSHFJ | GSHFU | GSHFN | GSHXJ | - | - |
EN 1.4301 Equiv. | - | - | SSHFJ | SSHFU | SSHFN | - | - | SSHXN |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CSHFJ | CSHFU | CSHFN | CSHXJ | CSHXU | CSHXN |
Part Number | - | P | - | Q | - | K | - | L | - | B |
SHFJ5 | - | P6.0 | - | Q4.50 | - | K5 | - | L30.55 | - | B3.2 |
D | H | M (Coarse) | M1 (Coarse) | m |
3 | 6 | M3 | - | 1 |
4 | M4 | |||
5 | 8 | M5 | ||
6 | M6 | M3 | 2 | |
8 | 11 | M8 | M4 | |
10 | 13 | M10 | M5 | 3 |
12 | 15 | M12 |
M (Coarse) | Tightening Torque |
N cm | |
M3 | ?147 |
M4 | ?333 |
M5 | ?676 |
M6 | 1156 |
M8 | 2803 |
M10 | 5557 |
M12 | 9702 |
Part Number | P | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | 0.1mm Increment | SHFJ | GSHFJ | SSHFJ | CSHFJ | GSHXJ | CSHXJ | ||||||
Straight | Shouldered | |||||||||||||
Straight SHFJ GSHFJ SSHFJ CSHFJ | Shouldered GSHXJ CSHXJ | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 3~6 | 10.00~60.00 | 2.0~5.0 | ||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 4~8 | 10.00~60.00 | 2.0~10.0 | ||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 5~10 | 10.00~60.00 | 2.0~10.0 | ||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||||
8 | 9.0~13.0 | 5.0~8.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | SHFU | GSHFU | SSHFU | CSHFU | SHXU | CSHXU | |||||||
Straight | Shouldered | |||||||||||||
Straight SHFU GSHFU SSHFU CSHFU | Shouldered SHXU CSHXU | 6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | ||||||||
Type | D | SHFN | GSHFN | SSHFN | CSHFN | SHXN | SSHXN | CSHXN | |||||||
Straight | Shouldered | ||||||||||||||
Straight SHFN GSHFN SSHFN CSHFN | Shouldered SHXN SSHXN CSHXN | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 0~6 | 10.00~60.00 | 2.0~5.0 | |||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 0~8 | 10.00~60.00 | 2.0~10.0 | |||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 0~10 | 10.00~60.00 | 2.0~10.0 | |||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 0~12 | 10.00~80.00 | 2.0~12.0 | |||||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 0~16 | 10.00~80.00 | 2.0~15.0 | |||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 0~20 | 10.00~100.00 | 2.0~20.0 | |||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 0~24 | 10.00~100.00 | 2.0~20.0 |