We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SRPCHR12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G[2-12/1]
Description
Support Pins/Threaded/Tapped/Pilot
Stock availability:
On request
If you are inspecting MISUMI SRPCHR12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]-G[2-12/1], communicate with FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are ages of experience, which are outlined in the quality of items and private attention to each purchaser. We esteem everyone, who joined with us - so, our regular customers pick up the most favorable purchase forms and discounts on the factory-made equipment market. At present, there are more than 3500 such consumers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Turkmenistan, Mozambique, Paraguay, Papua New Guinea, Liechtenstein, Syria, Honduras, Botswana, Rwanda, Angola, Mexico, Egypt, Belarus, Monaco, Tanzania, Hungary, Albania, Singapore, Poland, Kyrgyzstan, Tajikistan, Greece, Japan, Netherlands, Ecuador, Switzerland, Mauritania, Mauritius, Togo, Latvia, Ukraine, Cape Verde, Vietnam, Haiti, United States, Swaziland, Australia, Burkina Faso, Bosnia and Herzegovina, Philippines, Yemen, Georgia, New Zealand. A well-developed logistics bond and a partnership network cheer us to ship our elements anywhere in the planet as soon as possible without discrediting product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
Threaded | Tapped | Pilot | |||
EN 1.1191 Equiv. | Black Oxide | - | SRPCB | SRPAB | SRPBB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | SRPCR | SRPAR | - |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | SRPCHB | SRPAHB | SRPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SRPCHR | SRPAHR | SRPBHR |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | SRPCC | SRPAC | SRPBC |
Part Number | - | L | - | P | - | F | - | G | ||
Type | B | |||||||||
SRPCB SRPAHB | 10 14 | - - | L50.00 L70.02 | - - | P5.98 P6.00 | - - | F3.0 F5.0 | - | G5 |
M (Coarse) | Tightening Torque N cm |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | ?1156 |
M8 | ?2803 |
M10 | ?5557 |
M12 | ?9702 |
M16 | 24108 |
M20 | 46942 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | F 0.1mm Increment | G 1mm Increment | m | (C) | d | M (Coarse) | M1 (Coarse) | ?1 | d1 | |||
Type | B | |||||||||||||
Threaded only | ||||||||||||||
Threaded SRPCB SRPCR SRPCHB SRPCHR SRPCC | Tapped SRPAB SRPAR SRPAHB SRPAHR SRPAC | Pilot SRPBB SRPBHB SRPBHR SRPBC | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0 or 2?G?dx2 | 1 | 6.9 | 4 | M4 | M3 | - | - |
7 | 3.00~6.00 | 2.0~15.0 | 8.1 | |||||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | |||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 2 | 11.5 | M5 | 6 | 8 | ||||||
12 | 4.00~10.00 | 13.9 | 6 | M6 | 10 | |||||||||
13 | 5.00~10.00 | 2.0~25.0 | 3 | 15 | M6 | 8 | ||||||||
14 | 16.2 | |||||||||||||
17 | 8.00~15.00 | 2.0~30.0 | 19.6 | 8 | M8 | 9 | 12 | |||||||
19 | 21.9 | M8 | ||||||||||||
24 | 10.00~15.00 | 4 | 27.7 | 10 | M10 | 10 | 16 |