We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SRPCC13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0
Description
Support Pins/Threaded/Tapped/Pilot
Stock availability:
On request
If you are seeking MISUMI SRPCC13-L[20-80/0.01]-P[5-10/0.01]-F[2-25/0.1]-G0, reach FAMAGA, the world's chief vendor of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are portrayed in the quality of products and special attention to each customer. We praise everyone, who joined with us - therefore, our regular consumers obtain the most convenient purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 600 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Vietnam, Uganda, Mauritius, Ecuador, Switzerland, Burma, Romania, Ghana, Sweden, India, Equatorial Guinea, Thailand, Liberia, Australia, Denmark, Benin, Turkmenistan, Malawi, Morocco, Libya, Central African Republic, Dominica, Afghanistan, Tonga, Togo, Moldova, Iran, Niger, Iraq, Guatemala, Hungary, Argentina, Tanzania, Bulgaria, Jordan, Cameroon, New Zealand, Kiribati, Mongolia, Georgia, Nigeria, Andorra. A well-elaborated logistics link and a partnership network allow us to ship our products anywhere in the globe with no delay without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is rising every day. We are proud that users choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as keep on top of it.
To ask a question or order, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
Threaded | Tapped | Pilot | |||
EN 1.1191 Equiv. | Black Oxide | - | SRPCB | SRPAB | SRPBB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | SRPCR | SRPAR | - |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | SRPCHB | SRPAHB | SRPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SRPCHR | SRPAHR | SRPBHR |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | SRPCC | SRPAC | SRPBC |
Part Number | - | L | - | P | - | F | - | G | ||
Type | B | |||||||||
SRPCB SRPAHB | 10 14 | - - | L50.00 L70.02 | - - | P5.98 P6.00 | - - | F3.0 F5.0 | - | G5 |
M (Coarse) | Tightening Torque N cm |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | ?1156 |
M8 | ?2803 |
M10 | ?5557 |
M12 | ?9702 |
M16 | 24108 |
M20 | 46942 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | F 0.1mm Increment | G 1mm Increment | m | (C) | d | M (Coarse) | M1 (Coarse) | ?1 | d1 | |||
Type | B | |||||||||||||
Threaded only | ||||||||||||||
Threaded SRPCB SRPCR SRPCHB SRPCHR SRPCC | Tapped SRPAB SRPAR SRPAHB SRPAHR SRPAC | Pilot SRPBB SRPBHB SRPBHR SRPBC | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0 or 2?G?dx2 | 1 | 6.9 | 4 | M4 | M3 | - | - |
7 | 3.00~6.00 | 2.0~15.0 | 8.1 | |||||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | |||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 2 | 11.5 | M5 | 6 | 8 | ||||||
12 | 4.00~10.00 | 13.9 | 6 | M6 | 10 | |||||||||
13 | 5.00~10.00 | 2.0~25.0 | 3 | 15 | M6 | 8 | ||||||||
14 | 16.2 | |||||||||||||
17 | 8.00~15.00 | 2.0~30.0 | 19.6 | 8 | M8 | 9 | 12 | |||||||
19 | 21.9 | M8 | ||||||||||||
24 | 10.00~15.00 | 4 | 27.7 | 10 | M10 | 10 | 16 |