We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SRPCB8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-10/1]
Description
Support Pins/Threaded/Tapped/Pilot
Stock availability:
On request
If you are inspecting MISUMI SRPCB8-L[15-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-10/1], communicate with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are ages of experience, which are symbolized in the quality of products and personalseparate attention to each orderer. We esteem everyone, who engaged with us - hence, our regular purchasers obtain the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such customers, and we constantly make new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Macedonia, Costa Rica, Sierra Leone, The Gambia, Kiribati, Romania, Italy, Liberia, Yemen, Sudan, Serbia, Tajikistan, Suriname, Nicaragua, Dominica, Slovenia, Switzerland, Niger, Russia, Monaco, Uganda, Latvia, Mauritius, Equatorial Guinea, Bulgaria, United Arab Emirates, Armenia, Mauritania, Sweden, Burkina Faso, Guyana, Hungary, Mozambique, Egypt, Togo, Kuwait, Philippines, Qatar, Syria, Luxembourg, Samoa, North Korea, Albania, Vietnam. A well-developed logistics network and a partnership network assist us to ship our products anywhere in the planet on-time without discrediting product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that users choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, phone us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
Threaded | Tapped | Pilot | |||
EN 1.1191 Equiv. | Black Oxide | - | SRPCB | SRPAB | SRPBB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | SRPCR | SRPAR | - |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | SRPCHB | SRPAHB | SRPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SRPCHR | SRPAHR | SRPBHR |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | SRPCC | SRPAC | SRPBC |
Part Number | - | L | - | P | - | F | - | G | ||
Type | B | |||||||||
SRPCB SRPAHB | 10 14 | - - | L50.00 L70.02 | - - | P5.98 P6.00 | - - | F3.0 F5.0 | - | G5 |
M (Coarse) | Tightening Torque N cm |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | ?1156 |
M8 | ?2803 |
M10 | ?5557 |
M12 | ?9702 |
M16 | 24108 |
M20 | 46942 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | F 0.1mm Increment | G 1mm Increment | m | (C) | d | M (Coarse) | M1 (Coarse) | ?1 | d1 | |||
Type | B | |||||||||||||
Threaded only | ||||||||||||||
Threaded SRPCB SRPCR SRPCHB SRPCHR SRPCC | Tapped SRPAB SRPAR SRPAHB SRPAHR SRPAC | Pilot SRPBB SRPBHB SRPBHR SRPBC | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0 or 2?G?dx2 | 1 | 6.9 | 4 | M4 | M3 | - | - |
7 | 3.00~6.00 | 2.0~15.0 | 8.1 | |||||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | |||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 2 | 11.5 | M5 | 6 | 8 | ||||||
12 | 4.00~10.00 | 13.9 | 6 | M6 | 10 | |||||||||
13 | 5.00~10.00 | 2.0~25.0 | 3 | 15 | M6 | 8 | ||||||||
14 | 16.2 | |||||||||||||
17 | 8.00~15.00 | 2.0~30.0 | 19.6 | 8 | M8 | 9 | 12 | |||||||
19 | 21.9 | M8 | ||||||||||||
24 | 10.00~15.00 | 4 | 27.7 | 10 | M10 | 10 | 16 |