We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SRPCB7-L[10-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-8/1]
Description
Support Pins/Threaded/Tapped/Pilot
Stock availability:
On request
If you are questing MISUMI SRPCB7-L[10-50/0.01]-P[3-6/0.01]-F[2-15/0.1]-G[2-8/1], reach FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are ages of experience, which are outlined in the quality of merchandises and special attention to each consumer. We value everyone, who worked with us - hence, our regular clients bring in the most acceptable purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Kiribati, Haiti, Bosnia and Herzegovina, Georgia, India, Eritrea, Dominican Republic, Gambia, Swaziland, Equatorial Guinea, Peru, Cuba, Sweden, Fiji, Syria, Colombia, Bolivia, Slovakia, El Salvador, The Bahamas, Bangladesh, Madagascar, Costa Rica, Algeria, Senegal, Vietnam, Nigeria, Belarus, Dominica, South Korea, Nicaragua, Israel, Seychelles, Mauritania, Djibouti, Nepal, Croatia, Cyprus, East Timor, Serbia, Pakistan, Tonga, Finland, Switzerland. A well-elaborated logistics bond and a partnership network cheer us to conduct our elements anywhere in the planet as soon as possible without disreputing product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that clients choose FAMAGA again and again, and we are glad to make more developed and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, phone us or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
Threaded | Tapped | Pilot | |||
EN 1.1191 Equiv. | Black Oxide | - | SRPCB | SRPAB | SRPBB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | SRPCR | SRPAR | - |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | SRPCHB | SRPAHB | SRPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SRPCHR | SRPAHR | SRPBHR |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | SRPCC | SRPAC | SRPBC |
Part Number | - | L | - | P | - | F | - | G | ||
Type | B | |||||||||
SRPCB SRPAHB | 10 14 | - - | L50.00 L70.02 | - - | P5.98 P6.00 | - - | F3.0 F5.0 | - | G5 |
M (Coarse) | Tightening Torque N cm |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | ?1156 |
M8 | ?2803 |
M10 | ?5557 |
M12 | ?9702 |
M16 | 24108 |
M20 | 46942 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | F 0.1mm Increment | G 1mm Increment | m | (C) | d | M (Coarse) | M1 (Coarse) | ?1 | d1 | |||
Type | B | |||||||||||||
Threaded only | ||||||||||||||
Threaded SRPCB SRPCR SRPCHB SRPCHR SRPCC | Tapped SRPAB SRPAR SRPAHB SRPAHR SRPAC | Pilot SRPBB SRPBHB SRPBHR SRPBC | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0 or 2?G?dx2 | 1 | 6.9 | 4 | M4 | M3 | - | - |
7 | 3.00~6.00 | 2.0~15.0 | 8.1 | |||||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | |||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 2 | 11.5 | M5 | 6 | 8 | ||||||
12 | 4.00~10.00 | 13.9 | 6 | M6 | 10 | |||||||||
13 | 5.00~10.00 | 2.0~25.0 | 3 | 15 | M6 | 8 | ||||||||
14 | 16.2 | |||||||||||||
17 | 8.00~15.00 | 2.0~30.0 | 19.6 | 8 | M8 | 9 | 12 | |||||||
19 | 21.9 | M8 | ||||||||||||
24 | 10.00~15.00 | 4 | 27.7 | 10 | M10 | 10 | 16 |