We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SRPAHR19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]
Description
Support Pins/Threaded/Tapped/Pilot
Stock availability:
On request
If you are pursuing MISUMI SRPAHR19-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1], catch up with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of outcomes and special attention to each orderer. We understand everyone, who joined with us - hence, our regular buyers obtain the most helpful purchase forms and discounts on the factory-made equipment market. Now, there are more than 4500 such consumers, and we constantly form new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Brunei, Antigua and Barbuda, Guinea-Bissau, Slovakia, Yemen, Nigeria, Albania, New Zealand, Denmark, Angola, Mali, Jamaica, Kenya, Ghana, Belgium, Moldova, Andorra, Azerbaijan, Qatar, Switzerland, Malta, Ukraine, Austria, Kuwait, Gambia, Bolivia, Fiji, Greece, Norway, Belize, Tunisia, South Sudan, Bulgaria, Djibouti, Israel, Czech Republic, Zambia, Australia, Bangladesh, Poland, Central African Republic, Kazakhstan. A well-elaborated logistics network and a partnership network allow us to dispatch our products anywhere in the globe as soon as possible without discrediting product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are happy that users choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, phone us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
Threaded | Tapped | Pilot | |||
EN 1.1191 Equiv. | Black Oxide | - | SRPCB | SRPAB | SRPBB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | SRPCR | SRPAR | - |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | SRPCHB | SRPAHB | SRPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SRPCHR | SRPAHR | SRPBHR |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | SRPCC | SRPAC | SRPBC |
Part Number | - | L | - | P | - | F | - | G | ||
Type | B | |||||||||
SRPCB SRPAHB | 10 14 | - - | L50.00 L70.02 | - - | P5.98 P6.00 | - - | F3.0 F5.0 | - | G5 |
M (Coarse) | Tightening Torque N cm |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | ?1156 |
M8 | ?2803 |
M10 | ?5557 |
M12 | ?9702 |
M16 | 24108 |
M20 | 46942 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | F 0.1mm Increment | G 1mm Increment | m | (C) | d | M (Coarse) | M1 (Coarse) | ?1 | d1 | |||
Type | B | |||||||||||||
Threaded only | ||||||||||||||
Threaded SRPCB SRPCR SRPCHB SRPCHR SRPCC | Tapped SRPAB SRPAR SRPAHB SRPAHR SRPAC | Pilot SRPBB SRPBHB SRPBHR SRPBC | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0 or 2?G?dx2 | 1 | 6.9 | 4 | M4 | M3 | - | - |
7 | 3.00~6.00 | 2.0~15.0 | 8.1 | |||||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | |||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 2 | 11.5 | M5 | 6 | 8 | ||||||
12 | 4.00~10.00 | 13.9 | 6 | M6 | 10 | |||||||||
13 | 5.00~10.00 | 2.0~25.0 | 3 | 15 | M6 | 8 | ||||||||
14 | 16.2 | |||||||||||||
17 | 8.00~15.00 | 2.0~30.0 | 19.6 | 8 | M8 | 9 | 12 | |||||||
19 | 21.9 | M8 | ||||||||||||
24 | 10.00~15.00 | 4 | 27.7 | 10 | M10 | 10 | 16 |