We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SRPAC17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1]
Description
Support Pins/Threaded/Tapped/Pilot
Stock availability:
On request
If you are inspecting MISUMI SRPAC17-L[20-80/0.01]-P[8-15/0.01]-F[2-30/0.1], communicate with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and particular attention to each purchaser. We praise everyone, who cooperated with us - so, our regular purchasers pick up the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Venezuela, Bangladesh, Vietnam, San Marino, Burma, Afghanistan, Sudan, United States, Slovakia, Tajikistan, France, Estonia, Eswatini, South Korea, Kenya, Albania, Belgium, Sweden, Monaco, Seychelles, Cape Verde, Malaysia, India, Laos, Togo, Finland, Netherlands, Morocco, Algeria, Zambia, North Korea, Burkina Faso, Turkmenistan, Peru, Fiji, Cyprus, Switzerland, Tonga, Syria, Greece, Indonesia, Swaziland, Mauritania, Zimbabwe, Jamaica, Senegal, Georgia, Suriname. A well-shaped logistics connection and a partnership network guide us to conduct our goods anywhere in the world on-time without damaging product quality.
A special source of honor for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the direction of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is increasing every day. We are glad that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as keep on top of it.
To inquire or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
Threaded | Tapped | Pilot | |||
EN 1.1191 Equiv. | Black Oxide | - | SRPCB | SRPAB | SRPBB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | SRPCR | SRPAR | - |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | SRPCHB | SRPAHB | SRPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SRPCHR | SRPAHR | SRPBHR |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | SRPCC | SRPAC | SRPBC |
Part Number | - | L | - | P | - | F | - | G | ||
Type | B | |||||||||
SRPCB SRPAHB | 10 14 | - - | L50.00 L70.02 | - - | P5.98 P6.00 | - - | F3.0 F5.0 | - | G5 |
M (Coarse) | Tightening Torque N cm |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | ?1156 |
M8 | ?2803 |
M10 | ?5557 |
M12 | ?9702 |
M16 | 24108 |
M20 | 46942 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | F 0.1mm Increment | G 1mm Increment | m | (C) | d | M (Coarse) | M1 (Coarse) | ?1 | d1 | |||
Type | B | |||||||||||||
Threaded only | ||||||||||||||
Threaded SRPCB SRPCR SRPCHB SRPCHR SRPCC | Tapped SRPAB SRPAR SRPAHB SRPAHR SRPAC | Pilot SRPBB SRPBHB SRPBHR SRPBC | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0 or 2?G?dx2 | 1 | 6.9 | 4 | M4 | M3 | - | - |
7 | 3.00~6.00 | 2.0~15.0 | 8.1 | |||||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | |||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 2 | 11.5 | M5 | 6 | 8 | ||||||
12 | 4.00~10.00 | 13.9 | 6 | M6 | 10 | |||||||||
13 | 5.00~10.00 | 2.0~25.0 | 3 | 15 | M6 | 8 | ||||||||
14 | 16.2 | |||||||||||||
17 | 8.00~15.00 | 2.0~30.0 | 19.6 | 8 | M8 | 9 | 12 | |||||||
19 | 21.9 | M8 | ||||||||||||
24 | 10.00~15.00 | 4 | 27.7 | 10 | M10 | 10 | 16 |