We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SRPAC12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1]
Description
Support Pins/Threaded/Tapped/Pilot
Stock availability:
On request
If you are seeking MISUMI SRPAC12-L[20-80/0.01]-P[4-10/0.01]-F[2-20/0.1], call FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are illustrated in the quality of products and private attention to each user. We appreciate everyone, who collaborated with us - hence, our regular consumers receive the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Spain, Mauritius, Kenya, Cambodia, Oman, Ghana, Costa Rica, Brazil, Belarus, Congo, Papua New Guinea, Iceland, Vietnam, Kyrgyzstan, Togo, Lithuania, Honduras, Uganda, Uzbekistan, Paraguay, Nigeria, Andorra, Estonia, Finland, Kiribati, Greece, Liberia, Uruguay, Zimbabwe, Samoa, Qatar, Rwanda, Fiji, Zambia, Ecuador, Eswatini, Ukraine, Cyprus, Sudan, Botswana, Senegal, Iran, Hungary, Bosnia and Herzegovina, Malta, Swaziland, Cameroon, Central African Republic. A well-elaborated logistics series and a partnership network assist us to send our units anywhere in the globe with no delay without discrediting product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this number is increasing every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or place an order, contact us or send a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
Threaded | Tapped | Pilot | |||
EN 1.1191 Equiv. | Black Oxide | - | SRPCB | SRPAB | SRPBB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | SRPCR | SRPAR | - |
EN 1.1191 Equiv. | Black Oxide | Treated Hardness: 45 ~ 50HRC | SRPCHB | SRPAHB | SRPBHB |
EN 1.1191 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 45 ~ 50HRC Plating Hardness: 750HV ~ | SRPCHR | SRPAHR | SRPBHR |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | SRPCC | SRPAC | SRPBC |
Part Number | - | L | - | P | - | F | - | G | ||
Type | B | |||||||||
SRPCB SRPAHB | 10 14 | - - | L50.00 L70.02 | - - | P5.98 P6.00 | - - | F3.0 F5.0 | - | G5 |
M (Coarse) | Tightening Torque N cm |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | ?1156 |
M8 | ?2803 |
M10 | ?5557 |
M12 | ?9702 |
M16 | 24108 |
M20 | 46942 |
Part Number | L 0.01mm Increment | P 0.01mm Increment | F 0.1mm Increment | G 1mm Increment | m | (C) | d | M (Coarse) | M1 (Coarse) | ?1 | d1 | |||
Type | B | |||||||||||||
Threaded only | ||||||||||||||
Threaded SRPCB SRPCR SRPCHB SRPCHR SRPCC | Tapped SRPAB SRPAR SRPAHB SRPAHR SRPAC | Pilot SRPBB SRPBHB SRPBHR SRPBC | 6 | 10.00~50.00 | 3.00~4.00 | 2.0~12.0 | 0 or 2?G?dx2 | 1 | 6.9 | 4 | M4 | M3 | - | - |
7 | 3.00~6.00 | 2.0~15.0 | 8.1 | |||||||||||
8 | 15.00~50.00 | 9.2 | 5 | M5 | M4 | |||||||||
10 | 20.00~80.00 | 4.00~8.00 | 2.0~20.0 | 2 | 11.5 | M5 | 6 | 8 | ||||||
12 | 4.00~10.00 | 13.9 | 6 | M6 | 10 | |||||||||
13 | 5.00~10.00 | 2.0~25.0 | 3 | 15 | M6 | 8 | ||||||||
14 | 16.2 | |||||||||||||
17 | 8.00~15.00 | 2.0~30.0 | 19.6 | 8 | M8 | 9 | 12 | |||||||
19 | 21.9 | M8 | ||||||||||||
24 | 10.00~15.00 | 4 | 27.7 | 10 | M10 | 10 | 16 |