We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPSTD12-P[7-12/0.01]
Description
Small Head/Tapped/P Configurable
Stock availability:
On request
If you are seeking MISUMI SJPSTD12-P[7-12/0.01], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each consumer. We understand everyone, who conspired with us - so, our regular buyers accept the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Vietnam, Malaysia, Albania, South Sudan, Kiribati, Japan, Papua New Guinea, Qatar, The Gambia, Panama, Honduras, Belize, Swaziland, Montenegro, Romania, Seychelles, Fiji, Kuwait, Madagascar, Bangladesh, Cyprus, Iran, Ireland, Finland, Suriname, Malta, Mauritania, Uzbekistan, Pakistan, Mauritius, Estonia, Indonesia, El Salvador, Togo, Nigeria, Croatia, Ghana, Georgia, Denmark, Zimbabwe, Argentina, Poland, Peru, Afghanistan, Hungary. A well-built logistics link and a partnership network let us to conduct our products anywhere in the world with no delay without discrediting product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or make a request, call us by phone or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPS | TB (Round) | JPS | TA (Round) TD (Diamond) | FPS | TA (Round) TD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPS | GFPS | ||||
EN 1.4301 Equiv.* | - | - | SJPS | SJPS | SFPS | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Plating Hardness: 750HV ~ | - | - | HFPS | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPS | - | CFPS |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPS | TA | 6 | - | P4.50 | ||||||
FPS | TA | 10 | - | P8.52 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | M (Coarse) | * Tightening Torque Ncm | ? | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||
JPS SJPS CJPS | TB (Round) | ?6 | -0.004 -0.012 | ?4 | ?5 | 10 | 5 | 2 | M3 | 147 | 5 | |||||||
?8 | -0.005 -0.014 | ?6 | ?7 | 15 | 6 | 3 | M5 | 676 | 8 | |||||||||
10 | ?7 | ?8 | ?9 | 10 | 8 | |||||||||||||
12 | -0.006 -0.017 | ?8 | ?9 | 10 | 11 | 12 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque Ncm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPS GJPS SJPS | TA (Round) TD (Diamond) | ?5 | -0.004 -0.012 | 3.00~5.00 | 10 | ?5 | 2 | 1.2 | M2 | - | ?3 |
?6 | 4.00~6.00 | 1.5 | M3 | ?147 | ?5 | ||||||
?6T | M2.6 | - | ?4 | ||||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 15 | ?6 | 3 | 1.8 | M5 | ?676 | ?8 | ||
?8T | M4 | ?333 | ?6 | ||||||||
10 | ?7.00~10.00 | ?8 | 2.2 | M5 | ?676 | ?8 | |||||
12 | -0.006 -0.017 | ?7.00~12.00 | 2.5 | ||||||||
13 | ?8.00~13.00 | 22 | 4 | 3 | M8 | 2803 | 12 | ||||
16 | 10.00~16.00 | 10 | 4 | ||||||||
20 | -0.007 -0.020 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque Ncm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPS GFPS SFPS HFPS CFPS | TA (Round) TD (Diamond) | ?5 | -0.004 -0.012 | 3.00~5.00 | 8~10 | 2.0~10.0 | 2 | 1.2 | M2 | - | ?3 |
?6 | 4.00~6.00 | 8(9)~12 | 2.0~12.0 | 1.5 | M3 | ?147 | ?5 | ||||
?6T | M2.6 | - | ?4 | ||||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 11(12)~16 | 2.0~15.0 | 3 | 1.8 | M5 | ?676 | ?8 | ||
?8T | M4 | ?333 | ?6 | ||||||||
10 | ?7.00~10.00 | 11(12)~20 | 3.0~20.0 | 2.2 | M5 | ?676 | ?8 | ||||
10T | 8(12)~16 | M4 | ?333 | ?6 | |||||||
12 | -0.006 -0.017 | ?7.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | M5 | ?676 | ?8 | |||
12T | 8(12)~18 | M4 | ?333 | ?6 | |||||||
13 | ?8.00~13.00 | 13(14)~26 | 5.0~20.0 | 4 | 3 | M8 | 2803 | 10 | |||
13T | 10(14)~20 | M6 | 1156 | ?9 | |||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 4 | M8 | 2803 | 12 | ||||
16T | 10(14)~24 | M6 | 1156 | ?9 | |||||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | ?9 |