We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPQPD13-[14-18/0.01]
Description
Spherical Large Head/Standard/P Configurable
Stock availability:
On request
If you are looking for MISUMI SJPQPD13-[14-18/0.01], reach FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are years of experience, which are depicted in the quality of products and special attention to each buyer. We understand everyone, who cooperated with us - so, our regular buyers bring in the most beneficial purchase conditions and discounts on the manufacturing equipment market. At present, there are more than 4000 such buyers, and we constantly form new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the world Germany, United Kingdom, Bulgaria, Qatar, Bahrain, Bhutan, Yemen, Italy, Haiti, Burkina Faso, Uruguay, Pakistan, Seychelles, Thailand, Equatorial Guinea, Eritrea, Botswana, Kuwait, India, Denmark, Djibouti, Benin, Finland, Rwanda, Netherlands, Slovakia, Bolivia, Malaysia, Panama, Mongolia, Uzbekistan, Albania, Dominica, Cape Verde, Switzerland, Comoros, Nicaragua, Vietnam, Luxembourg, Armenia, Croatia, Montenegro, Philippines, Norway, The Gambia, Chile, Latvia, United States, Nepal, Ghana. A well-shaped logistics system and a partnership network assist us to ship our items anywhere in the earth immediately without discrediting product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this number is amounting every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as to stay on the top.
To request or place an order, call us by phone or write to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | B (m6) PB (p6) | JPQ | A (m6) PA (p6) D (m6) PD (p6) | FPQ | A (m6) PA (p6) D (m6) PD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | HJPQ (Round only) | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQ | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQ | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQ | MCFPQ |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | D Tol. Shape | D | ||||||||
JPQ FPQ MFPQ | A A PA | 4 4 12 | - - - | 5.00 P5.00 P15.98 | - - | L5 L12 | - - | B2.5 B5.5 |
Part Number | P Selection | L | B | C | ? | |||||||||||||||
Type | D Tolerance and Shape | D | D Tol. | |||||||||||||||||
m6 | p6 | |||||||||||||||||||
JPQ SJPQ CJPQ | B (m6) PB (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 3 | 0.1 | 0 | |||||||||||
2 | 3 | 4 | 4 | 0.5 | ||||||||||||||||
3 | 4 | 5 | 6 | 5 | 5 | 1 | ||||||||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 5 | 6 | 7 | 6 | 1 | |||||||||||||
5 | 6 | 7 | 8 | 10 | ||||||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | |||||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9 | 10 | 11 | 12 | 15 | 1.5 | ||||||||||||
10 | 12 | 13 | 10 | 2 |
Part Number | P 0.01mm Increment | L | B | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ HJPQ CJPQ (Buff Finished) MJPQ MCJPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 3 | 0.1 | 0 | - |
2 | 2.50~4.00 | 4 | 0.5 | 1.2 | ||||||
3 | 3.50~6.00 | 5 | 5 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 6 | 1 | 1.8 | ||||
5 | 5.50~8.00 | 10 | 2.2 | |||||||
6 | 6.50~10.00 | 8 | 3.0 | |||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 15 | 1.5 | 3.5 | ||||
10 | 11.00~15.00 | 10 | 2 | 4.0 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 5.0 | ||||||
13 | 14.00~18.00 | 22 | 2 | 5.5 | ||||||
16 | 17.00~25.00 | 3 | 7.0 | |||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 30 | 15 | 9.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ MGFPQ MCFPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0.1 | 0 | - |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | 1.2 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | 1 | 1.8 | |||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | 2.2 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | 3.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | 3.5 | |||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | 4.0 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | 5.5 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | 7.0 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9.0 |