We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPQPB8-12
Description
Spherical Large Head/Standard/P Configurable
Stock availability:
On request
If you are seeking MISUMI SJPQPB8-12, get in touch with FAMAGA, the world's main supplier of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of products and personalseparate attention to each purchaser. We appreciate everyone, who worked with us - therefore, our regular buyers obtain the most acceptable purchase forms and discounts on the machine made streamlined equipment market. Now, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Turkey, Panama, Guinea-Bissau, Malawi, Kuwait, Cuba, Tajikistan, Poland, Uganda, Benin, Mexico, Australia, Iraq, Japan, United States, Morocco, Nigeria, Tanzania, Cape Verde, Ireland, Pakistan, Czech Republic, Monaco, Hungary, Djibouti, Cyprus, Vietnam, Zambia, Liechtenstein, Samoa, East Timor, Luxembourg, Togo, Afghanistan, South Sudan, Bolivia, Peru, Iceland, Qatar, Senegal, Malaysia, Ukraine, Jamaica, Israel, Indonesia, Guatemala, Suriname, Bulgaria. A well-shaped logistics connection and a partnership network allow us to deliver our items anywhere in the earth quickly without compromising product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of industrial equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To consult or book, contact us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | B (m6) PB (p6) | JPQ | A (m6) PA (p6) D (m6) PD (p6) | FPQ | A (m6) PA (p6) D (m6) PD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | HJPQ (Round only) | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQ | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQ | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQ | MCFPQ |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | D Tol. Shape | D | ||||||||
JPQ FPQ MFPQ | A A PA | 4 4 12 | - - - | 5.00 P5.00 P15.98 | - - | L5 L12 | - - | B2.5 B5.5 |
Part Number | P Selection | L | B | C | ? | |||||||||||||||
Type | D Tolerance and Shape | D | D Tol. | |||||||||||||||||
m6 | p6 | |||||||||||||||||||
JPQ SJPQ CJPQ | B (m6) PB (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 3 | 0.1 | 0 | |||||||||||
2 | 3 | 4 | 4 | 0.5 | ||||||||||||||||
3 | 4 | 5 | 6 | 5 | 5 | 1 | ||||||||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 5 | 6 | 7 | 6 | 1 | |||||||||||||
5 | 6 | 7 | 8 | 10 | ||||||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | |||||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9 | 10 | 11 | 12 | 15 | 1.5 | ||||||||||||
10 | 12 | 13 | 10 | 2 |
Part Number | P 0.01mm Increment | L | B | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ HJPQ CJPQ (Buff Finished) MJPQ MCJPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 3 | 0.1 | 0 | - |
2 | 2.50~4.00 | 4 | 0.5 | 1.2 | ||||||
3 | 3.50~6.00 | 5 | 5 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 6 | 1 | 1.8 | ||||
5 | 5.50~8.00 | 10 | 2.2 | |||||||
6 | 6.50~10.00 | 8 | 3.0 | |||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 15 | 1.5 | 3.5 | ||||
10 | 11.00~15.00 | 10 | 2 | 4.0 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 5.0 | ||||||
13 | 14.00~18.00 | 22 | 2 | 5.5 | ||||||
16 | 17.00~25.00 | 3 | 7.0 | |||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 30 | 15 | 9.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ MGFPQ MCFPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0.1 | 0 | - |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | 1.2 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | 1 | 1.8 | |||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | 2.2 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | 3.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | 3.5 | |||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | 4.0 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | 5.5 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | 7.0 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9.0 |