We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPQND20-[22-30/0.01]
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
If you are pursuing MISUMI SJPQND20-[22-30/0.01], communicate with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of products and special attention to each orderer. We praise everyone, who conspired with us - so, our regular customers receive the most favorable purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Sri Lanka, United States, Guyana, Andorra, Bahamas, Russia, Uzbekistan, East Timor, Romania, Yemen, Zimbabwe, Monaco, Singapore, South Sudan, Swaziland, Chad, Czech Republic, Brazil, Poland, Nicaragua, Kuwait, Indonesia, Equatorial Guinea, Vietnam, Central African Republic, Burkina Faso, Benin, Guatemala, Kazakhstan, Macedonia, Madagascar, North Korea, Seychelles, Tunisia, Belarus, Tajikistan, China, Mauritania, Mexico, Libya, Botswana, The Gambia, Pakistan, Chile, Albania, Uganda, Georgia, Nepal, United Arab Emirates, Philippines. A well-shaped logistics link and a partnership network let us to conduct our elements anywhere in the planet as soon as possible without compromising product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is increasing every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | ?3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | ?5 | M3 | ?147 | ?4.5 | |||||||||
?4 | -0.004 -0.012 | 5 | 6 | 7 | ?6 | M4 | ?333 | ?6 | ||||||||||||
?5 | 6 | 7 | 8 | 3 | M5 | ?676 | ?7.5 | |||||||||||||
?6 | 7 | 8 | 9 | 10 | ?8 | M6 | 1156 | ?9 | ||||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQN GJPQN SJPQN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | M4 | 333 | ?6 | 1.8 | |||
?5 | 5.50~8.00 | ?3 | M5 | 676 | ?7.5 | 2.2 | ||||
?6 | ?6.50~10.00 | ?8 | M6 | ?1156 | ?9 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | M8 | ?2803 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | ?5557 | 15 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8 | M12 | ?9702 | 18 | 5 | |||
16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | ?6 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | M5 | 676 | ?7.5 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | M6 | ?1156 | ?9 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | M8 | ?2803 | 12 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | M10 | ?5557 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | M12 | ?9702 | 18 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | ?4~12 | M4 | 333 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | ?5~15 | M5 | 676 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | ?6~18 | M6 | ?1156 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | ?8~24 | M8 | ?2803 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | M10 | ?5557 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | M12 | ?9702 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |