We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPQNBB4-7
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
If you are questing MISUMI SJPQNBB4-7, reach FAMAGA, the world's main producer of factory-made equipment. Our company has progressed for more than ten years - these are ages of experience, which are illustrated in the quality of spare parts and private attention to each customer. We esteem everyone, who engaged with us - therefore, our regular consumers obtain the most acceptable purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Honduras, Poland, Georgia, Kiribati, Romania, Malaysia, Dominican Republic, Fiji, Syria, Lebanon, Nicaragua, Croatia, Slovenia, East Timor, Belize, Senegal, Czech Republic, Indonesia, Jamaica, Mauritius, Sweden, Japan, Luxembourg, Bosnia and Herzegovina, Latvia, South Korea, Seychelles, Australia, Russia, Zambia, Suriname, Ukraine, Yemen, Tanzania, Afghanistan, Antigua and Barbuda, Samoa, Mexico, Kuwait, Turkey, Burkina Faso, Panama, Belarus, Austria, Guatemala, Angola, United Arab Emirates, Costa Rica, Estonia, Switzerland. A well-built logistics link and a partnership network cheer us to dispatch our items anywhere in the world promptly without discrediting product quality.
A specific source of dignity for FAMAGA is its staff members, each of whom contributes to common cause. We call into our team only experts, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as keep on top of it.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | ?3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | ?5 | M3 | ?147 | ?4.5 | |||||||||
?4 | -0.004 -0.012 | 5 | 6 | 7 | ?6 | M4 | ?333 | ?6 | ||||||||||||
?5 | 6 | 7 | 8 | 3 | M5 | ?676 | ?7.5 | |||||||||||||
?6 | 7 | 8 | 9 | 10 | ?8 | M6 | 1156 | ?9 | ||||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQN GJPQN SJPQN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | M4 | 333 | ?6 | 1.8 | |||
?5 | 5.50~8.00 | ?3 | M5 | 676 | ?7.5 | 2.2 | ||||
?6 | ?6.50~10.00 | ?8 | M6 | ?1156 | ?9 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | M8 | ?2803 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | ?5557 | 15 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8 | M12 | ?9702 | 18 | 5 | |||
16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | ?6 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | M5 | 676 | ?7.5 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | M6 | ?1156 | ?9 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | M8 | ?2803 | 12 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | M10 | ?5557 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | M12 | ?9702 | 18 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | ?4~12 | M4 | 333 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | ?5~15 | M5 | 676 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | ?6~18 | M6 | ?1156 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | ?8~24 | M8 | ?2803 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | M10 | ?5557 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | M12 | ?9702 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |