We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPQNBB4-5
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
If you are looking for MISUMI SJPQNBB4-5, catch up with FAMAGA, the world's principle retailer of industrialized equipment. Our company has existed for more than ten years - these are years of experience, which are described in the quality of goods and particular attention to each buyer. We value everyone, who worked with us - therefore, our regular purchasers bring in the most helpful purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Canada, Mozambique, Jamaica, India, Qatar, Cuba, South Sudan, East Timor, Burma, Fiji, Malaysia, Colombia, Mauritius, Burundi, Turkey, Libya, Brunei, Philippines, Costa Rica, Dominica, Monaco, Serbia, Eritrea, Madagascar, Poland, Comoros, New Zealand, El Salvador, Lithuania, Sweden, Macedonia, Swaziland, Norway, Latvia, Tunisia, Pakistan, Afghanistan, Nepal, Thailand, South Korea, United Arab Emirates, Burkina Faso, Kazakhstan, Egypt, The Gambia, Vietnam, Haiti, Luxembourg, Bolivia. A well-shaped logistics chains and a partnership network help us to ship our goods anywhere in the world on-time without disreputing product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the range of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this number is growing every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as to stay on the top.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | ?3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | ?5 | M3 | ?147 | ?4.5 | |||||||||
?4 | -0.004 -0.012 | 5 | 6 | 7 | ?6 | M4 | ?333 | ?6 | ||||||||||||
?5 | 6 | 7 | 8 | 3 | M5 | ?676 | ?7.5 | |||||||||||||
?6 | 7 | 8 | 9 | 10 | ?8 | M6 | 1156 | ?9 | ||||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQN GJPQN SJPQN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | M4 | 333 | ?6 | 1.8 | |||
?5 | 5.50~8.00 | ?3 | M5 | 676 | ?7.5 | 2.2 | ||||
?6 | ?6.50~10.00 | ?8 | M6 | ?1156 | ?9 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | M8 | ?2803 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | ?5557 | 15 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8 | M12 | ?9702 | 18 | 5 | |||
16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | ?6 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | M5 | 676 | ?7.5 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | M6 | ?1156 | ?9 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | M8 | ?2803 | 12 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | M10 | ?5557 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | M12 | ?9702 | 18 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | ?4~12 | M4 | 333 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | ?5~15 | M5 | 676 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | ?6~18 | M6 | ?1156 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | ?8~24 | M8 | ?2803 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | M10 | ?5557 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | M12 | ?9702 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |