We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI SJPNBB8-12, connect FAMAGA, the world's principle vendor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each orderer. We value everyone, who liased with us - thus, our regular clients bring in the most beneficial purchase forms and discounts on the industrial equipment market. Now, there are more than 4500 such clients, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Zambia, France, Oman, Austria, Syria, Bulgaria, Israel, Albania, Chad, Hungary, Palestine, Montenegro, Macedonia, Mozambique, Burundi, Gambia, Qatar, Kazakhstan, Serbia, Brazil, Algeria, Namibia, Georgia, North Korea, Armenia, Kyrgyzstan, Liberia, Sweden, Nepal, Kenya, Mexico, Azerbaijan, Bolivia, Laos, Mongolia, Thailand, Denmark, India, Tonga, Libya, Iran, South Korea, Equatorial Guinea, New Zealand. A well-shaped logistics link and a partnership network allow us to ship our items anywhere in the planet quickly without damaging product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically advanced industrial equipment so as stay in control.
To request or place an order, call us by phone or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
Type | Shape Code | Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPN | BB (Round) | JPN | A (Round) D (Diamond) | FPN | A (Round) D (Diamond) | FPNL | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPN | GFPN | GFPNL | |||||
EN 1.2510 Equiv. | - | - | - | - | BFPN | - | |||||
EN 1.4301 Equiv.* | - | - | SJPN | SJPN | SFPN | SFPNL | |||||
EN 1.4301 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Plating Hardness: 750HV ~ | - | HJPN | HFPN | - | |||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPN | CJPN | CFPN | CFPNL |
Part Number | - | P | - | L | - | B | - | ML | ||||
Type | Shape | D | ||||||||||
JPN | A | 3 | - | 5.20 | ||||||||
FPN | A | 5 | - | P6.00 | - | L5 | - | B4.0 | ||||
FPNL | A | 8 | - | P9.51 | - | L8 | - | B4.0 | - | ML8 |
Part Number | P Selection | L | B | ML | M (Coarse) | * Tightening Torque N • cm | m | (W) | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPN SJPN CJPN | BB (Round) | ?3 | -0.002 -0.008 | 3.5 | 4 | 4.5 | 5 | 6 | 2 | 5 | ?4.5 | ?3 | ?147 | 2 | 1.5 | |||||||
?4 | -0.004 -0.012 | 4.5 | 5 | 6 | 7 | 6 | ?6 | ?4 | ?333 | 3 | 1.8 | |||||||||||
?5 | 6 | 7 | 8 | 3 | ?7.5 | ?5 | ?676 | 2.2 | ||||||||||||||
?6 | 7 | 8 | 9 | 10 | 8 | ?9 | ?6 | 1156 | 3 | |||||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | 12 | ?8 | 2803 | 4 | 3.5 | ||||||||||
10 | 11 | 12 | 13 | 10 | 15 | 10 | 5557 | 4 |
Part Number | P 0.01mm Increment | L | B | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPN GJPN SJPN HJPN CJPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | ?4.5 | ?3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | ?6 | ?4 | 333 | 3 | 1.8 | |||
?5 | 5.50~8.00 | ?3 | ?7.5 | ?5 | 676 | 2.2 | |||||
?6 | ?6.50~10.00 | ?8 | ?9 | ?6 | ?1156 | 3 | |||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | 12 | ?8 | ?2803 | 4 | 3.5 | |||
10 | 11.00~15.00 | 10 | 15 | 10 | ?5557 | 4 | |||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8 | 18 | 12 | ?9702 | 5 | ||||
16 | 17.00~25.00 | 24 | 16 | 24108 | 5 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPN GFPN BFPN SFPN HFPN CFPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 4.5 | ?3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 6 | ?4 | 333 | 3 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | 7.5 | ?5 | 676 | 2.2 | ||||
?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | 9 | ?6 | ?1156 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | 12 | ?8 | ?2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 15 | 10 | ?5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 18 | 12 | ?9702 | 5 | |||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 24 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPNL GFPNL SFPNL CFPNL | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 3~9 | 3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | ?4~12 | 4 | 333 | 3 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | ?5~15 | 5 | 676 | 2.2 | ||||
?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | ?6~18 | 6 | ?1156 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | ?8~24 | 8 | ?2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | 10 | ?5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | 12 | ?9702 | 5 | |||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | 20 | 46942 | 9 |