We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPNBB8-11
Description
Large Head/Threaded/P Configurable
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting MISUMI SJPNBB8-11, call FAMAGA, the world's primary provider of industrial equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of goods and individual attention to each user. We cherish everyone, who joined with us - therefore, our regular consumers procure the most acceptable purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly sign new agreements. More than 700 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Finland, Bahamas, Bhutan, Afghanistan, Bangladesh, Brunei, South Korea, Zambia, Japan, Burkina Faso, Slovenia, Indonesia, Djibouti, Czech Republic, Angola, The Bahamas, Andorra, Latvia, Mongolia, Guatemala, Haiti, Benin, Tunisia, Malaysia, Estonia, Mozambique, Monaco, Central African Republic, Australia, Bolivia, Austria, South Sudan, Ukraine, Albania, Peru, Kuwait, Panama, Cape Verde, Qatar, Comoros, Nepal, Rwanda, Costa Rica, Suriname. A well-elaborated logistics connection and a partnership network guide us to send our units anywhere in the earth with no delay without discrediting product quality.
A particular source of good name for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or book, contact us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
| Type | Shape Code | Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
| EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPN | BB (Round) | JPN | A (Round) D (Diamond) | FPN | A (Round) D (Diamond) | FPNL | A (Round) D (Diamond) | |
| EN 1.2510 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPN | GFPN | GFPNL | |||||
| EN 1.2510 Equiv. | - | - | - | - | BFPN | - | |||||
| EN 1.4301 Equiv.* | - | - | SJPN | SJPN | SFPN | SFPNL | |||||
| EN 1.4301 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Plating Hardness: 750HV ~ | - | HJPN | HFPN | - | |||||
| EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPN | CJPN | CFPN | CFPNL |
| Part Number | - | P | - | L | - | B | - | ML | ||||
| Type | Shape | D | ||||||||||
| JPN | A | 3 | - | 5.20 | ||||||||
| FPN | A | 5 | - | P6.00 | - | L5 | - | B4.0 | ||||
| FPNL | A | 8 | - | P9.51 | - | L8 | - | B4.0 | - | ML8 |
| Part Number | P Selection | L | B | ML | M (Coarse) | * Tightening Torque N • cm | m | (W) | ||||||||||||||
| Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
| JPN SJPN CJPN | BB (Round) | ?3 | -0.002 -0.008 | 3.5 | 4 | 4.5 | 5 | 6 | 2 | 5 | ?4.5 | ?3 | ?147 | 2 | 1.5 | |||||||
| ?4 | -0.004 -0.012 | 4.5 | 5 | 6 | 7 | 6 | ?6 | ?4 | ?333 | 3 | 1.8 | |||||||||||
| ?5 | 6 | 7 | 8 | 3 | ?7.5 | ?5 | ?676 | 2.2 | ||||||||||||||
| ?6 | 7 | 8 | 9 | 10 | 8 | ?9 | ?6 | 1156 | 3 | |||||||||||||
| ?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | 12 | ?8 | 2803 | 4 | 3.5 | ||||||||||
| 10 | 11 | 12 | 13 | 10 | 15 | 10 | 5557 | 4 |
| Part Number | P 0.01mm Increment | L | B | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
| Type | Shape | D | D dim. Tolerance g6 | ||||||||
| JPN GJPN SJPN HJPN CJPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | ?4.5 | ?3 | 147 | 2 | 1.5 |
| ?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | ?6 | ?4 | 333 | 3 | 1.8 | |||
| ?5 | 5.50~8.00 | ?3 | ?7.5 | ?5 | 676 | 2.2 | |||||
| ?6 | ?6.50~10.00 | ?8 | ?9 | ?6 | ?1156 | 3 | |||||
| ?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | 12 | ?8 | ?2803 | 4 | 3.5 | |||
| 10 | 11.00~15.00 | 10 | 15 | 10 | ?5557 | 4 | |||||
| 12 | -0.006 -0.017 | 13.00~18.00 | ?8 | 18 | 12 | ?9702 | 5 | ||||
| 16 | 17.00~25.00 | 24 | 16 | 24108 | 5 | 7 | |||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | 30 | 20 | 46942 | 9 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
| Type | Shape | D | D dim. Tolerance g6 | ||||||||
| FPN GFPN BFPN SFPN HFPN CFPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 4.5 | ?3 | 147 | 2 | 1.5 |
| ?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 6 | ?4 | 333 | 3 | 1.8 | ||
| ?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | 7.5 | ?5 | 676 | 2.2 | ||||
| ?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | 9 | ?6 | ?1156 | 3 | ||||
| ?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | 12 | ?8 | ?2803 | 4 | 3.5 | ||
| 10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 15 | 10 | ?5557 | 4 | ||||
| 12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 18 | 12 | ?9702 | 5 | |||
| 16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 24 | 16 | 24108 | 5 | 7 | |||
| 20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 30 | 20 | 46942 | 9 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
| Type | Shape | D | D dim. Tolerance g6 | ||||||||
| FPNL GFPNL SFPNL CFPNL | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 3~9 | 3 | 147 | 2 | 1.5 |
| ?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | ?4~12 | 4 | 333 | 3 | 1.8 | ||
| ?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | ?5~15 | 5 | 676 | 2.2 | ||||
| ?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | ?6~18 | 6 | ?1156 | 3 | ||||
| ?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | ?8~24 | 8 | ?2803 | 4 | 3.5 | ||
| 10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | 10 | ?5557 | 4 | ||||
| 12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | 12 | ?9702 | 5 | |||
| 16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | 16 | 24108 | 5 | 7 | |||
| 20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | 20 | 46942 | 9 |
