We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI SJPNBB10-11, call FAMAGA, the world's principle vendor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are described in the quality of goods and individual attention to each orderer. We cherish everyone, who liased with us - therefore, our regular consumers bring in the most acceptable purchase forms and discounts on the factory-made equipment market. Now, there are more than 4 thousand such consumers, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Belarus, Netherlands, Azerbaijan, Suriname, Italy, East Timor, Brunei, Chile, The Gambia, Indonesia, Monaco, Syria, Singapore, Pakistan, Thailand, United Arab Emirates, Jamaica, Armenia, Sweden, Niger, Mexico, Nicaragua, Mozambique, Kenya, China, United States, Swaziland, Georgia, Guyana, Sierra Leone, Finland, New Zealand, Lithuania, Mauritania, Egypt, Haiti, Luxembourg, Benin, Cape Verde, Nepal, Zimbabwe, Senegal, Qatar, Antigua and Barbuda. A well-elaborated logistics link and a partnership network allow us to send our items anywhere in the earth quickly without discrediting product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this number is growing every day. We are glad that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To inquire or book, contact us or write to the online chat on our official website. You can also send a list of the needful equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
Type | Shape Code | Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPN | BB (Round) | JPN | A (Round) D (Diamond) | FPN | A (Round) D (Diamond) | FPNL | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPN | GFPN | GFPNL | |||||
EN 1.2510 Equiv. | - | - | - | - | BFPN | - | |||||
EN 1.4301 Equiv.* | - | - | SJPN | SJPN | SFPN | SFPNL | |||||
EN 1.4301 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Plating Hardness: 750HV ~ | - | HJPN | HFPN | - | |||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPN | CJPN | CFPN | CFPNL |
Part Number | - | P | - | L | - | B | - | ML | ||||
Type | Shape | D | ||||||||||
JPN | A | 3 | - | 5.20 | ||||||||
FPN | A | 5 | - | P6.00 | - | L5 | - | B4.0 | ||||
FPNL | A | 8 | - | P9.51 | - | L8 | - | B4.0 | - | ML8 |
Part Number | P Selection | L | B | ML | M (Coarse) | * Tightening Torque N • cm | m | (W) | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPN SJPN CJPN | BB (Round) | ?3 | -0.002 -0.008 | 3.5 | 4 | 4.5 | 5 | 6 | 2 | 5 | ?4.5 | ?3 | ?147 | 2 | 1.5 | |||||||
?4 | -0.004 -0.012 | 4.5 | 5 | 6 | 7 | 6 | ?6 | ?4 | ?333 | 3 | 1.8 | |||||||||||
?5 | 6 | 7 | 8 | 3 | ?7.5 | ?5 | ?676 | 2.2 | ||||||||||||||
?6 | 7 | 8 | 9 | 10 | 8 | ?9 | ?6 | 1156 | 3 | |||||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | 12 | ?8 | 2803 | 4 | 3.5 | ||||||||||
10 | 11 | 12 | 13 | 10 | 15 | 10 | 5557 | 4 |
Part Number | P 0.01mm Increment | L | B | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPN GJPN SJPN HJPN CJPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | ?4.5 | ?3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | ?6 | ?4 | 333 | 3 | 1.8 | |||
?5 | 5.50~8.00 | ?3 | ?7.5 | ?5 | 676 | 2.2 | |||||
?6 | ?6.50~10.00 | ?8 | ?9 | ?6 | ?1156 | 3 | |||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | 12 | ?8 | ?2803 | 4 | 3.5 | |||
10 | 11.00~15.00 | 10 | 15 | 10 | ?5557 | 4 | |||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8 | 18 | 12 | ?9702 | 5 | ||||
16 | 17.00~25.00 | 24 | 16 | 24108 | 5 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPN GFPN BFPN SFPN HFPN CFPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 4.5 | ?3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 6 | ?4 | 333 | 3 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | 7.5 | ?5 | 676 | 2.2 | ||||
?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | 9 | ?6 | ?1156 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | 12 | ?8 | ?2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 15 | 10 | ?5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 18 | 12 | ?9702 | 5 | |||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 24 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPNL GFPNL SFPNL CFPNL | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 3~9 | 3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | ?4~12 | 4 | 333 | 3 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | ?5~15 | 5 | 676 | 2.2 | ||||
?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | ?6~18 | 6 | ?1156 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | ?8~24 | 8 | ?2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | 10 | ?5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | 12 | ?9702 | 5 | |||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | 20 | 46942 | 9 |