We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPNA4-[4-7/0.01]
Description
Large Head/Threaded/P Configurable
Stock availability:
On request
If you are looking for MISUMI SJPNA4-[4-7/0.01], reach FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are cycles of experience, which are depicted in the quality of products and personalseparate attention to each buyer. We understand everyone, who liased with us - so, our regular customers get the most convenient purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such customers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the world Germany, United Kingdom, South Korea, Monaco, Belize, Dominica, Cuba, Costa Rica, Swaziland, Israel, Jamaica, Yemen, Mauritius, Eritrea, Benin, Australia, Switzerland, Croatia, Iceland, Syria, Chile, Latvia, South Sudan, Comoros, Macedonia, Estonia, Guatemala, Nepal, Philippines, Fiji, Guyana, Pakistan, Central African Republic, Mali, Burkina Faso, Belarus, Tajikistan, Peru, Ireland, Luxembourg, Suriname, Angola, Thailand, Panama, Cameroon. A well-shaped logistics network and a partnership network cheer us to send our units anywhere in the earth promptly without disreputing product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the field of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are glad that buyers choose FAMAGA again and again, and we are glad to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To ask a question or place an order, get in touch with us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
Type | Shape Code | Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPN | BB (Round) | JPN | A (Round) D (Diamond) | FPN | A (Round) D (Diamond) | FPNL | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPN | GFPN | GFPNL | |||||
EN 1.2510 Equiv. | - | - | - | - | BFPN | - | |||||
EN 1.4301 Equiv.* | - | - | SJPN | SJPN | SFPN | SFPNL | |||||
EN 1.4301 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Plating Hardness: 750HV ~ | - | HJPN | HFPN | - | |||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPN | CJPN | CFPN | CFPNL |
Part Number | - | P | - | L | - | B | - | ML | ||||
Type | Shape | D | ||||||||||
JPN | A | 3 | - | 5.20 | ||||||||
FPN | A | 5 | - | P6.00 | - | L5 | - | B4.0 | ||||
FPNL | A | 8 | - | P9.51 | - | L8 | - | B4.0 | - | ML8 |
Part Number | P Selection | L | B | ML | M (Coarse) | * Tightening Torque N • cm | m | (W) | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPN SJPN CJPN | BB (Round) | ?3 | -0.002 -0.008 | 3.5 | 4 | 4.5 | 5 | 6 | 2 | 5 | ?4.5 | ?3 | ?147 | 2 | 1.5 | |||||||
?4 | -0.004 -0.012 | 4.5 | 5 | 6 | 7 | 6 | ?6 | ?4 | ?333 | 3 | 1.8 | |||||||||||
?5 | 6 | 7 | 8 | 3 | ?7.5 | ?5 | ?676 | 2.2 | ||||||||||||||
?6 | 7 | 8 | 9 | 10 | 8 | ?9 | ?6 | 1156 | 3 | |||||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | 12 | ?8 | 2803 | 4 | 3.5 | ||||||||||
10 | 11 | 12 | 13 | 10 | 15 | 10 | 5557 | 4 |
Part Number | P 0.01mm Increment | L | B | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPN GJPN SJPN HJPN CJPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | ?4.5 | ?3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | ?6 | ?4 | 333 | 3 | 1.8 | |||
?5 | 5.50~8.00 | ?3 | ?7.5 | ?5 | 676 | 2.2 | |||||
?6 | ?6.50~10.00 | ?8 | ?9 | ?6 | ?1156 | 3 | |||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | 12 | ?8 | ?2803 | 4 | 3.5 | |||
10 | 11.00~15.00 | 10 | 15 | 10 | ?5557 | 4 | |||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8 | 18 | 12 | ?9702 | 5 | ||||
16 | 17.00~25.00 | 24 | 16 | 24108 | 5 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPN GFPN BFPN SFPN HFPN CFPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 4.5 | ?3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 6 | ?4 | 333 | 3 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | 7.5 | ?5 | 676 | 2.2 | ||||
?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | 9 | ?6 | ?1156 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | 12 | ?8 | ?2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 15 | 10 | ?5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 18 | 12 | ?9702 | 5 | |||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 24 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPNL GFPNL SFPNL CFPNL | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 3~9 | 3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | ?4~12 | 4 | 333 | 3 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | ?5~15 | 5 | 676 | 2.2 | ||||
?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | ?6~18 | 6 | ?1156 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | ?8~24 | 8 | ?2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | 10 | ?5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | 12 | ?9702 | 5 | |||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | 20 | 46942 | 9 |