We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPHAWM10-L[10-50/0.01]-D[11-30/1]-W[11-29/1]-F[10-30/1]
Description
Height Adjust Pins/With Shoulder/Round/Wrench Flats
Stock availability:
On request
If you are pursuing MISUMI SJPHAWM10-L[10-50/0.01]-D[11-30/1]-W[11-29/1]-F[10-30/1], reach FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and private attention to each orderer. We value everyone, who liased with us - hence, our regular buyers obtain the most acceptable purchase forms and discounts on the factory-made equipment market. At present, there are more than 4000 such customers, and we constantly arrange new agreements. More than 600 transactions are made per day, because FAMAGA works all over the planet Germany, United Kingdom, Guinea-Bissau, Barbados, Estonia, Greece, Dominican Republic, Azerbaijan, The Bahamas, Malawi, Bosnia and Herzegovina, Ireland, Nicaragua, Chad, Antigua and Barbuda, Djibouti, Dominica, South Sudan, Japan, Seychelles, Egypt, Senegal, Iraq, Turkmenistan, Finland, Gambia, Austria, Indonesia, Mauritius, Croatia, Guatemala, Albania, Serbia, Suriname, Switzerland, Uruguay, Tajikistan, Zimbabwe, Zambia, Swaziland, East Timor, Brunei, Kiribati, Botswana, Bolivia, South Korea, Brazil. A well-built logistics system and a partnership network assist us to conduct our products anywhere in the world immediately without compromising product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that users choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or order, call us by phone or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | Ordering Code, Shape Code | |
F Fixed | F Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPH | AF (Round) AW (Wrench Flats) | AFM (Round) AWM (Wrench Flats) |
Black Oxide | Treated Hardness: 60 ~ 63HRC | BJPH | |||
Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | HJPH | |||
EN 1.4301 Equiv. | - | - | SJPH | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPH | ||
EN 1.7242 Equiv. | - | Carburized Treated Hardness: 55HRC~ (Depth: 0.7 ~ 0.8) | TJPH |
Part Number | - | L | - | D | - | W | - | F | |
Round, Wrench Flats Threaded | |||||||||
(Round, F Fixed) | JPHAF3 | - | 5.21 | - | 6 | ||||
(Round, F Configurable) | JPHAFM3 | - | L5.21 | - | D6 | - | F9 | ||
(Wrench Flats, F Fixed) | HJPHAW10 | - | 20 | - | 15 | - | W11 | ||
(Wrench Flats, F Configurable) | HJPHAWM10 | - | L20.00 | - | D15 | - | W11 | - | F15 |
Shouldered, Threaded | |||||||||
(F Fixed) | JPHA8 | - | 14 | ||||||
(F Configurable) | JPHAM8 | - | L14.00 | - | F10 | ||||
Round, Wrench Flats Tapped | |||||||||
(Round) | JPHUF6 | - | 20.00 | ||||||
(Wrench Flats) | BJPHUW10 | - | 17.00 | - | W8 |
Part Number | L 0.01mm Increment | D 1mm Increment | W 1mm Increment | F | ||||
Type | Shape Code | M (Coarse) | * Tightening Torque Ncm | Standard | 1mm Increment | |||
JPH BJPH HJPH SJPH CJPH TJPH | AF (F Fixed) AFM (F Configurable) AW (F Fixed) AWM (F Configurable) | ?3 | ?147 | ?2.00~10.00 | 5~30
(M?4~13 | ?5 | 3~36
(M?F?Mx3) | |
?4 | ?333 | ?5~18 | ?6 | |||||
?5 | ?676 | ?6~23 | ?8 | |||||
?6 | 1156 | ?5.00~30.00 | ?7~28 | |||||
?8 | 2803 | ?9~29 | 10 | |||||
10 | 5557 | 10.00~50.00 | 11~29 | 12 | ||||
12 | 9702 | 13~29 | 15 |