We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing MISUMI SJPFNB8-9, call FAMAGA, the world's primary vendor of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of products and special attention to each orderer. We appreciate everyone, who cooperated with us - therefore, our regular purchasers obtain the most favorable purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Norway, Haiti, Sri Lanka, Estonia, Kyrgyzstan, Belarus, Moldova, Jamaica, Cape Verde, Oman, Gambia, Niger, Kazakhstan, East Timor, Iceland, Togo, Mozambique, Andorra, Egypt, Antigua and Barbuda, Nicaragua, Peru, Netherlands, Bolivia, Mali, Brunei, Jordan, Guatemala, Uzbekistan, Benin, Tajikistan, Sweden, Panama, Botswana, South Korea, Israel, El Salvador, Samoa, Chile, Finland, Sudan, Croatia, Dominica, Djibouti, United Arab Emirates. A well-elaborated logistics system and a partnership network let us to ship our products anywhere in the world with no delay without discrediting product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of machine made streamlined equipment.
All outcomes from FAMAGA are ensured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been provided, and this number is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To request or place an order, get in touch with us or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | |||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPFNB | JPFNA | FPFNA | FPFNLA | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPFNA | GFPFNA | GFPFNLA | |
EN 1.2510 Equiv. | - | - | - | BJPFNA | BFPFNA | - | |
EN 1.4301 Equiv.* | - | - | SJPFNB | SJPFNA | SFPFNA | SFPFNLA | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPFNB | - | CFPFNA | CFPFNLA |
Part Number | - | P | - | L | - | B | - | ML |
JPFNA3 FPFNA5 FPFNLA8 | - - - | 5.20 P7.80 P10.00 | - - | L8 L5 | - - | B4.0 B5.0 | - | ML8 |
P | h6 |
?3.50~6.00 | 0 -?0.008 |
?6.01~10.00 | 0 -?0.009 |
10.01~18.00 | 0 -?0.011 |
18.01~30.00 | 0 -?0.013 |
Part Number | P Selection | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | |||||||||
Type | D | D dim. Tolerance g6 | ||||||||||||||
JPFNB SJPFNB CJPFNB | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 3 | 0.5 | M3 | ?147 | ?4.5 | |||||
4 | -0.004 -0.012 | 5 | 6 | 8 | 4 | 1 | M4 | ?333 | ?6 | |||||||
5 | 6 | 8 | 9 | 3 | M5 | ?676 | ?7.5 | |||||||||
6 | 8 | 9 | 10 | 5 | M6 | 1156 | ?9 | |||||||||
8 | -0.005 -0.014 | 9 | 10 | 12 | 13 | 5 | 6 | 1.5 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
JPFNA GJPFNA BJPFNA SJPFNA | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?3 | 0.5 | ?M3 | 147 | ?4.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?4 | 1 | ?M4 | 333 | ?6 | ||
?5 | 5.50~8.00 | ?3 | ?M5 | 676 | ?7.5 | ||||
?6 | ?6.50~10.00 | ?5 | ?M6 | ?1156 | ?9 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | ?6 | 1.5 | ?M8 | ?2803 | 12 | |
10 | 11.00~15.00 | 10 | 2 | M10 | ?5557 | 15 | |||
12 | -0.006 -0.017 | 13.00~16.00 | ?8 | 20 | M12 | ?9702 | 18 | ||
16 | 17.00~25.00 | 25 | 3 | M16 | 24108 | 24 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 30 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNA GFPFNA BFPFNA SFPFNA CFPFNA | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | ?3.0~10.0 | 0.5 | ?M3 | 147 | ?4.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | ?4.0~10.0 | 1 | ?M4 | 333 | ?6 | |
?5 | 5.50~8.00 | ?3~10 | ?4.0~10.0 | ?M5 | 676 | ?7.5 | |||
?6 | ?6.50~10.00 | ?3~10 | ?4.0~12.0 | ?M6 | ?1156 | ?9 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | ?5.0~15.0 | 1.5 | ?M8 | ?2803 | 12 | |
10 | 11.00~15.00 | ?5~15 | ?6.0~20.0 | 2 | M10 | ?5557 | 15 | ||
12 | -0.006 -0.017 | 13.00~16.00 | ?8~15 | ?6.0~20.0 | M12 | ?9702 | 18 | ||
16 | 17.00~25.00 | ?8~20 | ?7.0~20.0 | 3 | M16 | 24108 | 24 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNLA GFPFNLA SFPFNLA CFPFNLA | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | ?3.0~10.0 | 3~9 | 0.5 | ?M3 | 147 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | ?4.0~10.0 | ?4~12 | 1 | ?M4 | 333 | |
?5 | 5.50~8.00 | ?3~10 | ?4.0~10.0 | ?5~15 | ?M5 | 676 | |||
?6 | ?6.50~10.00 | ?3~10 | ?4.0~12.0 | ?6~18 | ?M6 | ?1156 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | ?5.0~15.0 | ?8~24 | 1.5 | ?M8 | ?2803 | |
10 | 11.00~15.00 | ?5~15 | ?6.0~20.0 | 10~30 | 2 | M10 | ?5557 | ||
12 | -0.006 -0.017 | 13.00~16.00 | ?8~15 | ?6.0~20.0 | 12~30 | M12 | ?9702 | ||
16 | 17.00~25.00 | ?8~20 | ?7.0~20.0 | 16~40 | 3 | M16 | 24108 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | 20~40 | M20 | 46942 |