We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPDTA10-12
Description
Large Flat Head/Tapped/P Standard
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for MISUMI SJPDTA10-12, get in touch with FAMAGA, the world's principle vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are described in the quality of merchandises and particular attention to each orderer. We praise everyone, who liased with us - therefore, our regular clients bring in the most acceptable purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 4 thousand such clients, and we constantly sign new agreements. More than 600 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Sudan, Bolivia, Serbia, Singapore, Antigua and Barbuda, Guinea-Bissau, Guyana, Liberia, Romania, Swaziland, Portugal, Guatemala, South Sudan, The Bahamas, Finland, Honduras, Haiti, Tunisia, Uruguay, Russia, Senegal, Comoros, Uzbekistan, Japan, Burkina Faso, Philippines, Costa Rica, El Salvador, Luxembourg, Bulgaria, Czech Republic, The Gambia, Brazil, Dominica, Malta, Jamaica, Madagascar, Togo, Croatia, Seychelles, Nepal, Kyrgyzstan, Zimbabwe, Syria. A well-shaped logistics series and a partnership network let us to ship our goods anywhere in the earth immediately without damaging product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or order, contact us or write to the online chat on our official website. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Material No. | Material | Surface Treatment | Hardness | Type | ||
| P Selectable | P Configurable | P, L, B Configurable | ||||
| EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDTA | JPDTC | FPDTC | |
| EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPDTA | GJPDTC | GFPDTC | |
| EN 1.2510 Equiv. | - | - | - | - | BFPDTC | |
| EN 1.4301 Equiv.* | - | - | SJPDTA | - | SFPDTC | |
| EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPDTA | - | - |
| Part Number | - | P | - | L | - | B |
| JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
| P | h6 |
| 5.50~6.00 | 0 -0.008 |
| 6.01~10.00 | 0 -0.009 |
| 10.01~18.00 | 0 -0.011 |
| 18.01~30.00 | 0 -0.013 |
| Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
| Type | D | D dim. Tolerance g6 | |||||||
| JPDTA GJPDTA SJPDTA CJPDTA | ?6 | -0.004 -0.012 | ?8, 10 | 10 | ?5 | M3 | ?147 | ?5 | 1 |
| ?8 | -0.005 -0.014 | 12 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
| 10 | 12, 14 | 16 | 10 | 2 | |||||
| 12 | -0.006 -0.017 | 16 | 20 | 20 | |||||
| 13 | 18 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
| 16 | 25 | 24 | 25 | ||||||
| 20 | -0.007 -0.020 | 30 | 32 | 30 |
| Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
| Type | D | D dim. Tolerance g6 | |||||||
| JPDTC GJPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?8 | ?4 | M2 | - | ?3 | 1 |
| ?6 | ?6.50~10.00 | 10 | ?5 | M3 | ?147 | ?5 | |||
| ?6T | M2.6 | - | ?4 | ||||||
| ?8 | -0.005 -0.014 | ?9.00~13.00 | 12 | ?6 | M5 | ?676 | ?8 | 1.5 | |
| ?8T | M4 | ?333 | ?6 | ||||||
| 10 | 11.00~15.00 | 16 | 10 | M5 | ?676 | ?8 | 2 | ||
| 12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | |||||
| 13 | 14.00~18.00 | 22 | 22 | M8 | 2803 | 12 | 3 | ||
| 16 | 17.00~25.00 | 24 | 25 | ||||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ? | C | ||
| Type | D | D dim. Tolerance g6 | |||||||
| FPDTC GFPDTC BFPDTC SFPDTC | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5~10 | 2.0~10.0 | M2 | - | ?3 | 1 |
| ?6 | ?6.50~10.00 | ?6~12 | 2.0~12.0 | M3 | ?147 | ?5 | |||
| ?6T | M2.6 | - | ?4 | ||||||
| ?8 | -0.005 -0.014 | ?9.00~13.00 | ?8~16 | 2.0~15.0 | M5 | ?676 | ?8 | 1.5 | |
| ?8T | ?6~16 | M4 | ?333 | ?6 | |||||
| 10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | ?676 | ?8 | 2 | ||
| 10T | ?6~16 | M4 | ?333 | ?6 | |||||
| 12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | ?676 | ?8 | ||
| 12T | ?8~18 | M4 | ?333 | ?6 | |||||
| 13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 2803 | 12 | 3 | ||
| 13T | ?8~20 | M6 | 1156 | ?9 | |||||
| 16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 2803 | 12 | |||
| 16T | 10~24 | M6 | 1156 | ?9 | |||||
| 20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 2803 | 12 | ||
| 20T | 12~30 | M6 | 1156 | ?9 |
