We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI SJPDSTB16-14, make contact with FAMAGA, the world's central distributor of machine made equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of products and particular attention to each client. We esteem everyone, who cooperated with us - thus, our regular customers pick up the most flexible purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, Costa Rica, Macedonia, Laos, Malawi, Jamaica, Lesotho, Liechtenstein, The Bahamas, Saudi Arabia, Iran, Cuba, Slovakia, Belize, Turkmenistan, Greece, Guinea, Sierra Leone, Philippines, Dominica, Burundi, Swaziland, Austria, Nicaragua, Gambia, Rwanda, North Korea, Iraq, Jordan, Mongolia, Yemen, Comoros, Tunisia, Egypt, Bangladesh, Malaysia, Malta, Bulgaria, Kiribati, Tonga, Paraguay, New Zealand, Seychelles, Bosnia and Herzegovina, Sudan. A well-developed logistics link and a partnership network allow us to dispatch our goods anywhere in the globe on-time without compromising product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All outputs from FAMAGA are affirmed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as stay in control.
To get some advice or book, phone us or write a message to the online chat on our official website. You can also dispatch a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPDSTB | JPDSTC | FPDSTC | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | - | GFPDSTC | |
EN 1.4301 Equiv.* | - | - | SJPDSTB | - | SFPDSTC | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPDSTC | CFPDSTC |
Part Number | - | P | - | L | - | B |
JPDSTC6 FPDSTC6 | - - | 4.00 P4.00 | - | L10 | - | B5.5 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||||||
Type | D | D dim. Tolerance g6 | |||||||||||
JPDSTB SJPDSTB | ?6 | -0.004 -0.012 | 4 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 | ||||
?8 | -0.005 -0.014 | 6 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |||||
10 | 8 | 16 | ?5 | M5 | ?676 | ?8 | |||||||
12 | -0.006 -0.017 | 10 | 20 | ?6 | 1.5 | ||||||||
16 | 10 | 14 | 24 | 10 | M8 | 2803 | 12 | 3 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
JPDSTC CJPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | 10 | ?3 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 12 | ?4 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 16 | ?5 | M5 | ?676 | ?8 | |||
12 | -0.006 -0.017 | ?7.00~12.00 | 20 | ?6 | 1.5 | ||||
13 | ?8.00~13.00 | 22 | 10 | M8 | 2803 | 12 | 2 | ||
16 | 10.00~16.00 | 24 | 10 | 3 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 32 | 20 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N cm | ? | C | ||
Type | D | D dim. Tolerance g6 | |||||||
FPDSTC GFPDSTC SFPDSTC CFPDSTC | ?6 | -0.004 -0.012 | 4.00~6.00 | ?8~12 | 2.0~12.0 | M3 | ?147 | ?5 | 0.5 |
?6T | M2.6 | - | ?4 | ||||||
?8 | -0.005 -0.014 | 6.00~8.00 | 11~16 | 2.0~15.0 | M4 | ?333 | ?6 | 1 | |
10 | ?7.00~10.00 | 11~20 | 3.0~20.0 | M5 | ?676 | ?8 | |||
10T | ?8~16 | M4 | ?333 | ?6 | |||||
12 | -0.006 -0.017 | ?7.00~12.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 1.5 | |
12T | ?8~18 | M4 | ?333 | ?6 | |||||
13 | ?8.00~13.00 | 13~26 | 5.0~20.0 | M8 | 2803 | 10 | 2 | ||
13T | 10~20 | M6 | 1156 | ?9 | |||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 3 | ||
16T | 10~24 | M6 | 1156 | ?9 | |||||
20 | -0.007 -0.020 | 13.00~20.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | ||
20T | 12~30 | M6 | 1156 | ?9 |