We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI SJPDPA8-12, contact FAMAGA, the world's top retailer of streamlined equipment. Our company has worked for more than ten years - these are years of experience, which are depicted in the quality of goods and special attention to each buyer. We understand everyone, who cooperated with us - thus, our regular consumers receive the most attractive purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4500 such consumers, and we constantly sign new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Bhutan, Hungary, Austria, Albania, Macedonia, Liberia, Switzerland, Lebanon, Russia, New Zealand, Armenia, Ukraine, Montenegro, Malta, Burundi, Finland, Turkmenistan, Nigeria, Saudi Arabia, Sierra Leone, El Salvador, Togo, Norway, Bangladesh, Greece, Georgia, Tonga, Paraguay, Liechtenstein, Haiti, Laos, Morocco, Andorra, Pakistan, Lithuania, Angola, Israel, Mali, Iraq, Denmark, Costa Rica, Iceland, Djibouti. A well-elaborated logistics network and a partnership network guide us to send our units anywhere in the planet with no delay without discrediting product quality.
A special source of good name for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of factory-made equipment.
All items from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is growing every day. We are happy that customers choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as stay in control.
To ask a question or make a request, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tol. | Type | D Tol. | Type | D Tol. | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | DA (m6) DPA (p6) | JP | DC (m6) DPC (p6) | FP | DC (m6) DPC (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | BJP | BJP | BFP | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | HJP | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | - | P | - | L | - | B | ||||
Type | D Tol. | D | ||||||||
JP | DA | 8 | - | 12 | ||||||
SJP | DPC | 10 | - | 14.01 | ||||||
CFP | DC | 12 | - | P15.97 | - | L12 | - | B3.5 |
P | h6 |
1.50~3.00 | 0 -0.006 |
3.01~6.00 | 0 -0.008 |
?6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P Selection | L | B | ? | C | ||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DA (m6) DPA (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 2 | 0 | 0.1 |
2 | 3 | 4 | 0.5 | ||||||
3 | 5 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 6, 8 | ||||||
5 | 8 | 8 | 4 | ||||||
6 | 8, 10 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 12 | 12 | 6 | 2 | 1.5 | ||
10 | 12, 14 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 16 | 20 | 20 | ||||
13 | 18 | 22 | 22 | ||||||
16 | 25 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | ? | C | ||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
JP GJP BJP SJP HJP CJP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 2 | 0 | 0.1 |
2 | 2.50~4.00 | 4 | 0.5 | ||||||
3 | 3.50~6.00 | 5 | 3 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | ||||||
5 | 5.50~8.00 | 8 | 4 | ||||||
6 | 6.50~10.00 | 10 | 5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 12 | 6 | 2 | 1.5 | ||
10 | 11.00~15.00 | 16 | 10 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 20 | 20 | ||||
13 | 14.00~18.00 | 22 | 22 | ||||||
16 | 17.00~25.00 | 24 | 25 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ? | C | ||||
Type | D Tol. | D | d dim. Tolerance | ||||||
m6 | p6 | ||||||||
FP GFP BFP SFP HFP CFP | DC (m6) DPC (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0 | 0.1 |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1 | ||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | ||||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 2 | 1.5 | ||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 |