We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPBTD20-[22-30/0.01]
Description
Large Head/Round/Tapped/P Standard
Stock availability:
On request
If you are pursuing MISUMI SJPBTD20-[22-30/0.01], reach FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of outputs and special attention to each orderer. We respect everyone, who conspired with us - so, our regular customers receive the most convenient purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Latvia, Guinea-Bissau, Netherlands, Lebanon, Swaziland, Slovenia, France, Uganda, Finland, Guatemala, Grenada, Jordan, Tajikistan, East Timor, Angola, Morocco, Bangladesh, Nicaragua, The Bahamas, Mozambique, Andorra, Algeria, Japan, Malta, Suriname, Switzerland, Brunei, United Arab Emirates, Comoros, South Sudan, Pakistan, Mali, Sudan, Estonia, Argentina, Luxembourg, Central African Republic, Jamaica, Sweden, Djibouti, Vietnam. A well-shaped logistics link and a partnership network allow us to conduct our products anywhere in the planet on-time without compromising product quality.
A particular source of pride for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is growing every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or make a request, call us by phone or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | BTB (Round) DTB (Diamond) | JP | BTA (Round) BTD (Diamond) | FP | BTA (Round) BTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | - | BJP (Round only) | - | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | - | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | P | - | L | - | B | |||||
- | ||||||||||
Type | Shape | D | ||||||||
JP | BTB | 6 | - | 8 | ||||||
JP | BTA | 10 | - | 12.10 | ||||||
FP | BTA | 10 | - | P11.01 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||||||||||
JP GJP SJP HJP CJP | BTB (Round) DTB (Diamond) | ?6 | -0.004 -0.012 | 8 | 10 | 10 | 8 | 3 | 3 | M3 | ?147 | 5 | |||||||
?6T | 8 | 10 | M2.6 | - | 4 | ||||||||||||||
?8 | -0.005 -0.014 | 10 | 12 | 13 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||||||||
?8T | 10 | 12 | 13 | M4 | ?333 | 6 | |||||||||||||
10 | 12 | 13 | 15 | 10 | 4 | M5 | ?676 | 8 | |||||||||||
12 | -0.006 -0.017 | 13 | 15 | 16 | 5 | ||||||||||||||
13 | 15 | 16 | 22 | 5.5 | M8 | 2803 | 12 | ||||||||||||
16 | 20 | 25 | 5 | 7 | |||||||||||||||
20 | -0.007 -0.020 | 25 | 30 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JP GJP BJP SJP CJP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | 3 | 2.2 | M2 | - | 3 |
?6 | 6.50~10.00 | 8 | 3 | M3 | ?147 | 5 | |||||
?6T | 6.50~10.00 | M2.6 | - | 4 | |||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||
?8T | 9.00~13.00 | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | 4 | M5 | ?676 | 8 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | ||||||||
13 | 14.00~18.00 | 22 | 5.5 | M8 | 2803 | 12 | |||||
16 | 17.00~25.00 | 5 | 7 | ||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FP GFP SFP HFP CFP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~12.0 | 3 | 2.2 | M2 | - | ?3 |
?6 | ?6.50~10.00 | 6(9)~12 | 3 | M3 | ?147 | ?5 | |||||
?6T | M2.6 | - | ?4 | ||||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | M5 | ?676 | ?8 | ||
?8T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | M5 | ?676 | ?8 | ||||
10T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | M5 | ?676 | ?8 | |||
12T | 8(12)~18 | M4 | ?333 | ?6 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | M8 | 2803 | 10 | ||||
13T | 8(14)~20 | M6 | 1156 | ?9 | |||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | M8 | 2803 | 12 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | ?9 |