We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI SJPBTB13-16, contact FAMAGA, the world's principle vendor of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of products and private attention to each orderer. We appreciate everyone, who conspired with us - thus, our regular buyers obtain the most attractive purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such purchasers, and we constantly make new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Uruguay, Burma, Burundi, The Bahamas, Equatorial Guinea, Liberia, Eritrea, France, Chile, Paraguay, South Sudan, United Arab Emirates, Netherlands, Guinea, Eswatini, Sierra Leone, Malawi, Malta, Tunisia, Turkey, Cape Verde, Liechtenstein, Togo, Bosnia and Herzegovina, Laos, Bangladesh, Iceland, Iran, Tonga, Israel, South Korea, Antigua and Barbuda, Argentina, Mozambique, Moldova, Jordan, Kenya, The Gambia, Greece, Mongolia. A well-built logistics network and a partnership network allow us to conduct our goods anywhere in the globe on-time without compromising product quality.
A special source of honor for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as not to lower the bar.
To inquire or make a request, contact us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | BTB (Round) DTB (Diamond) | JP | BTA (Round) BTD (Diamond) | FP | BTA (Round) BTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | - | BJP (Round only) | - | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | - | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | P | - | L | - | B | |||||
- | ||||||||||
Type | Shape | D | ||||||||
JP | BTB | 6 | - | 8 | ||||||
JP | BTA | 10 | - | 12.10 | ||||||
FP | BTA | 10 | - | P11.01 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||||||||||
JP GJP SJP HJP CJP | BTB (Round) DTB (Diamond) | ?6 | -0.004 -0.012 | 8 | 10 | 10 | 8 | 3 | 3 | M3 | ?147 | 5 | |||||||
?6T | 8 | 10 | M2.6 | - | 4 | ||||||||||||||
?8 | -0.005 -0.014 | 10 | 12 | 13 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||||||||
?8T | 10 | 12 | 13 | M4 | ?333 | 6 | |||||||||||||
10 | 12 | 13 | 15 | 10 | 4 | M5 | ?676 | 8 | |||||||||||
12 | -0.006 -0.017 | 13 | 15 | 16 | 5 | ||||||||||||||
13 | 15 | 16 | 22 | 5.5 | M8 | 2803 | 12 | ||||||||||||
16 | 20 | 25 | 5 | 7 | |||||||||||||||
20 | -0.007 -0.020 | 25 | 30 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JP GJP BJP SJP CJP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | 3 | 2.2 | M2 | - | 3 |
?6 | 6.50~10.00 | 8 | 3 | M3 | ?147 | 5 | |||||
?6T | 6.50~10.00 | M2.6 | - | 4 | |||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||
?8T | 9.00~13.00 | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | 4 | M5 | ?676 | 8 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | ||||||||
13 | 14.00~18.00 | 22 | 5.5 | M8 | 2803 | 12 | |||||
16 | 17.00~25.00 | 5 | 7 | ||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FP GFP SFP HFP CFP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~12.0 | 3 | 2.2 | M2 | - | ?3 |
?6 | ?6.50~10.00 | 6(9)~12 | 3 | M3 | ?147 | ?5 | |||||
?6T | M2.6 | - | ?4 | ||||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | M5 | ?676 | ?8 | ||
?8T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | M5 | ?676 | ?8 | ||||
10T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | M5 | ?676 | ?8 | |||
12T | 8(12)~18 | M4 | ?333 | ?6 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | M8 | 2803 | 10 | ||||
13T | 8(14)~20 | M6 | 1156 | ?9 | |||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | M8 | 2803 | 12 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | ?9 |