We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI SJPBTB10-12, make contact with FAMAGA, the world's principle vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are illustrated in the quality of products and private attention to each user. We respect everyone, who liased with us - therefore, our regular purchasers bring in the most helpful purchase conditions and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, East Timor, Romania, Jamaica, Italy, Azerbaijan, Tajikistan, Nicaragua, Gambia, Colombia, Poland, Madagascar, Jordan, Ukraine, Uzbekistan, Eritrea, Bolivia, Oman, Guinea, Monaco, Cyprus, Malaysia, Morocco, Mongolia, El Salvador, Armenia, Turkmenistan, Pakistan, Haiti, Finland, Sweden, United Arab Emirates, Seychelles, Libya, Croatia, Egypt, Austria, Mauritania, Philippines, China, Malta, United States, Samoa. A well-developed logistics series and a partnership network guide us to dispatch our units anywhere in the earth with no delay without disreputing product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are glad that customers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To consult or book, contact us or write a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | BTB (Round) DTB (Diamond) | JP | BTA (Round) BTD (Diamond) | FP | BTA (Round) BTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | - | BJP (Round only) | - | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | - | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | P | - | L | - | B | |||||
- | ||||||||||
Type | Shape | D | ||||||||
JP | BTB | 6 | - | 8 | ||||||
JP | BTA | 10 | - | 12.10 | ||||||
FP | BTA | 10 | - | P11.01 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||||||||||
JP GJP SJP HJP CJP | BTB (Round) DTB (Diamond) | ?6 | -0.004 -0.012 | 8 | 10 | 10 | 8 | 3 | 3 | M3 | ?147 | 5 | |||||||
?6T | 8 | 10 | M2.6 | - | 4 | ||||||||||||||
?8 | -0.005 -0.014 | 10 | 12 | 13 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||||||||
?8T | 10 | 12 | 13 | M4 | ?333 | 6 | |||||||||||||
10 | 12 | 13 | 15 | 10 | 4 | M5 | ?676 | 8 | |||||||||||
12 | -0.006 -0.017 | 13 | 15 | 16 | 5 | ||||||||||||||
13 | 15 | 16 | 22 | 5.5 | M8 | 2803 | 12 | ||||||||||||
16 | 20 | 25 | 5 | 7 | |||||||||||||||
20 | -0.007 -0.020 | 25 | 30 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JP GJP BJP SJP CJP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | 3 | 2.2 | M2 | - | 3 |
?6 | 6.50~10.00 | 8 | 3 | M3 | ?147 | 5 | |||||
?6T | 6.50~10.00 | M2.6 | - | 4 | |||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||
?8T | 9.00~13.00 | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | 4 | M5 | ?676 | 8 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | ||||||||
13 | 14.00~18.00 | 22 | 5.5 | M8 | 2803 | 12 | |||||
16 | 17.00~25.00 | 5 | 7 | ||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FP GFP SFP HFP CFP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~12.0 | 3 | 2.2 | M2 | - | ?3 |
?6 | ?6.50~10.00 | 6(9)~12 | 3 | M3 | ?147 | ?5 | |||||
?6T | M2.6 | - | ?4 | ||||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | M5 | ?676 | ?8 | ||
?8T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | M5 | ?676 | ?8 | ||||
10T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | M5 | ?676 | ?8 | |||
12T | 8(12)~18 | M4 | ?333 | ?6 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | M8 | 2803 | 10 | ||||
13T | 8(14)~20 | M6 | 1156 | ?9 | |||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | M8 | 2803 | 12 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | ?9 |