We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SJPBTA10-[11-15/0.01]
Description
Large Head/Round/Tapped/P Standard
Stock availability:
On request
If you are questing MISUMI SJPBTA10-[11-15/0.01], reach FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of outcomes and personalseparate attention to each user. We understand everyone, who cooperated with us - so, our regular customers get the most beneficial purchase conditions and discounts on the factory-made equipment market. Now, there are more than 3500 such purchasers, and we constantly make new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Bahrain, Tajikistan, The Bahamas, Cyprus, Slovenia, Antigua and Barbuda, Cuba, Angola, Dominican Republic, Ecuador, Romania, Afghanistan, Kuwait, North Korea, Nigeria, Belize, Guyana, Estonia, Japan, Chad, Bhutan, South Sudan, Bolivia, Vietnam, East Timor, Mali, Philippines, Zambia, Burundi, Guatemala, Turkmenistan, Liechtenstein, United States, Costa Rica, Djibouti, Madagascar, Montenegro, United Arab Emirates, Poland, Senegal, Mozambique, Panama, Peru, Eswatini, Belarus, Ireland. A well-shaped logistics network and a partnership network cheer us to dispatch our goods anywhere in the planet quickly without compromising product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the field of manufacturing equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this amount is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To get some advice or place an order, get in touch with us or write a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JP | BTB (Round) DTB (Diamond) | JP | BTA (Round) BTD (Diamond) | FP | BTA (Round) BTD (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJP | GJP | GFP | ||||
EN 1.2510 Equiv. | - | - | - | BJP (Round only) | - | ||||
EN 1.4301 Equiv.* | - | - | SJP | SJP | SFP | ||||
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HJP | - | HFP | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJP | CJP | CFP |
Part Number | P | - | L | - | B | |||||
- | ||||||||||
Type | Shape | D | ||||||||
JP | BTB | 6 | - | 8 | ||||||
JP | BTA | 10 | - | 12.10 | ||||||
FP | BTA | 10 | - | P11.01 | - | L12 | - | B6.4 |
Part Number | P Selection | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||||||||||
Type | Shape | D | D dim. Tolerance g6 | ||||||||||||||||
JP GJP SJP HJP CJP | BTB (Round) DTB (Diamond) | ?6 | -0.004 -0.012 | 8 | 10 | 10 | 8 | 3 | 3 | M3 | ?147 | 5 | |||||||
?6T | 8 | 10 | M2.6 | - | 4 | ||||||||||||||
?8 | -0.005 -0.014 | 10 | 12 | 13 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||||||||
?8T | 10 | 12 | 13 | M4 | ?333 | 6 | |||||||||||||
10 | 12 | 13 | 15 | 10 | 4 | M5 | ?676 | 8 | |||||||||||
12 | -0.006 -0.017 | 13 | 15 | 16 | 5 | ||||||||||||||
13 | 15 | 16 | 22 | 5.5 | M8 | 2803 | 12 | ||||||||||||
16 | 20 | 25 | 5 | 7 | |||||||||||||||
20 | -0.007 -0.020 | 25 | 30 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L | B | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JP GJP BJP SJP CJP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 10 | 6 | 3 | 2.2 | M2 | - | 3 |
?6 | 6.50~10.00 | 8 | 3 | M3 | ?147 | 5 | |||||
?6T | 6.50~10.00 | M2.6 | - | 4 | |||||||
?8 | -0.005 -0.014 | 9.00~13.00 | 15 | 4 | 3.5 | M5 | ?676 | 8 | |||
?8T | 9.00~13.00 | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | 4 | M5 | ?676 | 8 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | ||||||||
13 | 14.00~18.00 | 22 | 5.5 | M8 | 2803 | 12 | |||||
16 | 17.00~25.00 | 5 | 7 | ||||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | m | (W) | M (Coarse) | * Tightening Torque N•cm | ? | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FP GFP SFP HFP CFP | BTA (Round) BTD (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | 5(9)~10 | 2.0~12.0 | 3 | 2.2 | M2 | - | ?3 |
?6 | ?6.50~10.00 | 6(9)~12 | 3 | M3 | ?147 | ?5 | |||||
?6T | M2.6 | - | ?4 | ||||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | 8(12)~16 | 2.0~15.0 | 4 | 3.5 | M5 | ?676 | ?8 | ||
?8T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | 4 | M5 | ?676 | ?8 | ||||
10T | 6(12)~16 | M4 | ?333 | ?6 | |||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5 | M5 | ?676 | ?8 | |||
12T | 8(12)~18 | M4 | ?333 | ?6 | |||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | 5.5 | M8 | 2803 | 10 | ||||
13T | 8(14)~20 | M6 | 1156 | ?9 | |||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 5 | 7 | M8 | 2803 | 12 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9 | M8 | 2803 | 12 | |||
20T | 12(18)~30 | M6 | 1156 | ?9 |