We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SHFU12-P[13-16/0.1]-Q[5-15/0.01]-K[12-24/1]-L[10-100/0.01]-B[2-20/0.1]
Description
Support Pins/Press Fit/Tapped/Threaded
Stock availability:
On request
If you are seeking MISUMI SHFU12-P[13-16/0.1]-Q[5-15/0.01]-K[12-24/1]-L[10-100/0.01]-B[2-20/0.1], catch up with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each buyer. We understand everyone, who liased with us - hence, our regular purchasers procure the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Equatorial Guinea, Kiribati, Samoa, Gambia, Belgium, Lebanon, Philippines, Myanmar, Azerbaijan, New Zealand, Mongolia, Estonia, Australia, Iran, Djibouti, Tanzania, Vietnam, Panama, Malta, Laos, Paraguay, Libya, Syria, Norway, Mauritius, Austria, Kyrgyzstan, Ghana, Costa Rica, Denmark, Belize, Jordan, Poland, Tunisia, Belarus, Switzerland, Lithuania, Mali, India, Iraq, Zambia, Hungary, Namibia, Angola, Ukraine, Cameroon, Moldova, Botswana. A well-elaborated logistics link and a partnership network assist us to send our units anywhere in the planet with no delay without discrediting product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the field of machine made streamlined equipment.
All items from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been provided, and this quantity is increasing every day. We are glad that customers choose FAMAGA again and again, and we strive to make more progressive and technologically advanced industrial equipment so as not to lower the bar.
To ask a question or order, contact us or send a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||||
Straight | Shouldered | |||||||
Press Fit | Tapped | Threaded | Press Fit | Tapped | Threaded | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | SHFJ | SHFU | SHFN | - | SHXU | SHXN |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GSHFJ | GSHFU | GSHFN | GSHXJ | - | - |
EN 1.4301 Equiv. | - | - | SSHFJ | SSHFU | SSHFN | - | - | SSHXN |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CSHFJ | CSHFU | CSHFN | CSHXJ | CSHXU | CSHXN |
Part Number | - | P | - | Q | - | K | - | L | - | B |
SHFJ5 | - | P6.0 | - | Q4.50 | - | K5 | - | L30.55 | - | B3.2 |
D | H | M (Coarse) | M1 (Coarse) | m |
3 | 6 | M3 | - | 1 |
4 | M4 | |||
5 | 8 | M5 | ||
6 | M6 | M3 | 2 | |
8 | 11 | M8 | M4 | |
10 | 13 | M10 | M5 | 3 |
12 | 15 | M12 |
M (Coarse) | Tightening Torque |
N cm | |
M3 | ?147 |
M4 | ?333 |
M5 | ?676 |
M6 | 1156 |
M8 | 2803 |
M10 | 5557 |
M12 | 9702 |
Part Number | P | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | 0.1mm Increment | SHFJ | GSHFJ | SSHFJ | CSHFJ | GSHXJ | CSHXJ | ||||||
Straight | Shouldered | |||||||||||||
Straight SHFJ GSHFJ SSHFJ CSHFJ | Shouldered GSHXJ CSHXJ | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 3~6 | 10.00~60.00 | 2.0~5.0 | ||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 4~8 | 10.00~60.00 | 2.0~10.0 | ||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 5~10 | 10.00~60.00 | 2.0~10.0 | ||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||||
8 | 9.0~13.0 | 5.0~8.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | SHFU | GSHFU | SSHFU | CSHFU | SHXU | CSHXU | |||||||
Straight | Shouldered | |||||||||||||
Straight SHFU GSHFU SSHFU CSHFU | Shouldered SHXU CSHXU | 6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | ||||||||
Type | D | SHFN | GSHFN | SSHFN | CSHFN | SHXN | SSHXN | CSHXN | |||||||
Straight | Shouldered | ||||||||||||||
Straight SHFN GSHFN SSHFN CSHFN | Shouldered SHXN SSHXN CSHXN | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 0~6 | 10.00~60.00 | 2.0~5.0 | |||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 0~8 | 10.00~60.00 | 2.0~10.0 | |||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 0~10 | 10.00~60.00 | 2.0~10.0 | |||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 0~12 | 10.00~80.00 | 2.0~12.0 | |||||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 0~16 | 10.00~80.00 | 2.0~15.0 | |||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 0~20 | 10.00~100.00 | 2.0~20.0 | |||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 0~24 | 10.00~100.00 | 2.0~20.0 |