We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPSTRP3-L[6-10/0.1]-P[1.5-6/0.01]-B[1-30/0.1]-H[3.1-8/0.01]-T[1-20/0.1]
Description
Small Diameter with Shoulder
Stock availability:
On request
If you are pursuing MISUMI SFPSTRP3-L[6-10/0.1]-P[1.5-6/0.01]-B[1-30/0.1]-H[3.1-8/0.01]-T[1-20/0.1], call FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of products and special attention to each user. We cherish everyone, who collaborated with us - hence, our regular customers get the most acceptable purchase forms and discounts on the factory-made equipment market. Now, there are more than 4500 such consumers, and we constantly form new agreements. More than 600 proceedings are resolved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Ecuador, South Sudan, Turkey, Mauritius, Nigeria, Mexico, Iceland, Zambia, Indonesia, Laos, Serbia, Belgium, Kiribati, Armenia, Lebanon, United Arab Emirates, Grenada, Macedonia, Malawi, Guinea, Philippines, Pakistan, Mali, Antigua and Barbuda, Thailand, Libya, Bangladesh, Andorra, Jordan, Kyrgyzstan, North Korea, Tanzania, Cameroon, Czech Republic, Afghanistan, Hungary, Ukraine, Ghana, East Timor, Australia, Greece, Paraguay, Egypt, Algeria, Equatorial Guinea. A well-developed logistics chains and a partnership network guide us to deliver our products anywhere in the earth with no delay without damaging product quality.
A particular source of honor for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the field of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are glad that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as to stay on the top.
To consult or make a request, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Hardness | Type | |||||||
Standard Tolerance | Tolerance Selection | ||||||||
Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
SK95 (ISO-TC90 Equiv.) | 50~58HRC | SFSST | SPSST | STSST | SXSST | SFPST | SPPST | STPST | - |
EN 1.4301 Equiv. | - | SFSSS | SPSSS | STSSS | SXSSS | SFPSS | SPPSS | - | SXPSS |
Part Number | - | L | - | P | - | B | - | H | - | T | - | E |
SXSSS4 | - | L10.0 | - | P6.2 | - | B5.0 | - | H8.0 | - | T3.0 | - | E3.0 |
SPPSTPP2 | - | L8.0 | - | P2.0 | - | B4.0 | - | H3.5 | - | T5.0 |
Part Number | D | d dim. Tolerance m6 | L 0.5mm Increment | P 0.1mm Increment | P Dimension Tolerance | B 0.5mm Increment | H 0.1mm Increment | T 0.5mm Increment | E 0.5mm Increment (Taper only) | R | |||
Flat SFSST SFSSS | Sphere SPSST SPSSS | Taper R STSST STSSS | Tapered SXSST SXSSS | 1 | +0.008 +0.002 | 2.0~5.0 | 1.0~2.9 | 0 -0.01 | 1.0~10.0 | 1.1~3.0 | 1.0~10.0 | 0.5~5.0 | 0.2 |
2 | 4.0~10.0 | 1.0~4.0 | 1.0~30.0 | 2.1~7.0 | 1.0~20.0 | 0.2 | |||||||
3 | 6.0~10.0 | 1.5~6.0 | 3.1~8.0 | 0.3 | |||||||||
4 | +0.012 +0.004 | 8.0~10.0 | 2.0~7.0 | 4.1~9.0 | 0.4 |
Part Number | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | H 0.01mm Increment | T 0.1mm Increment | E 0.5mm Increment (Taper only) | R | M | ||||||
TYPE | D Tolerance | P Tolerance | D | |||||||||||
Flat SFPST SFPSS | Sphere SPSST SPPSS | Taper R STPST | Tapered SXPSS | P +0.005 0 Q 0.002 R 0 -0.005 | P +0.005 0 Q 0.002 R 0 -0.005 | 2 | 0 1.0~10.0 | 1.00~4.00 | 1.0~30.0 | 2.10~7.00 | 1.0~20.0 | 0.5~5.0 | 0.2 | M2 |
3 | 1.50~6.00 | 3.10~8.00 | 0.2 | M3 | ||||||||||
4 | 2.00~7.00 | 4.10~9.00 | 0.4 | M4 |