We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPSTQP1-L[2-5/0.1]-P[1-2.9/0.01]-B[1-10/0.1]-H[1.1-3/0.01]-T[1-10/0.1]
Description
Small Diameter with Shoulder
Stock availability:
On request
If you are inspecting MISUMI SFPSTQP1-L[2-5/0.1]-P[1-2.9/0.01]-B[1-10/0.1]-H[1.1-3/0.01]-T[1-10/0.1], catch up with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are described in the quality of outputs and particular attention to each user. We admire everyone, who collaborated with us - hence, our regular consumers get the most helpful purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such clients, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the earth Germany, United Kingdom, Uganda, South Africa, Mali, Swaziland, Namibia, Brazil, Suriname, Moldova, Benin, Saudi Arabia, Zambia, Greece, Chad, Cape Verde, Turkmenistan, Laos, Liechtenstein, Gambia, Vietnam, Mauritania, Chile, Denmark, Bangladesh, Senegal, Japan, Macedonia, Andorra, Montenegro, Kenya, Armenia, Tanzania, Bulgaria, Kuwait, Austria, Mongolia, Australia, Burundi, Equatorial Guinea, Slovakia, Turkey, Seychelles, Malta, Philippines. A well-built logistics chains and a partnership network allow us to dispatch our products anywhere in the earth quickly without compromising product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is increasing every day. We are glad that customers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as to stay on the top.
To get some advice or make a request, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Hardness | Type | |||||||
Standard Tolerance | Tolerance Selection | ||||||||
Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
SK95 (ISO-TC90 Equiv.) | 50~58HRC | SFSST | SPSST | STSST | SXSST | SFPST | SPPST | STPST | - |
EN 1.4301 Equiv. | - | SFSSS | SPSSS | STSSS | SXSSS | SFPSS | SPPSS | - | SXPSS |
Part Number | - | L | - | P | - | B | - | H | - | T | - | E |
SXSSS4 | - | L10.0 | - | P6.2 | - | B5.0 | - | H8.0 | - | T3.0 | - | E3.0 |
SPPSTPP2 | - | L8.0 | - | P2.0 | - | B4.0 | - | H3.5 | - | T5.0 |
Part Number | D | d dim. Tolerance m6 | L 0.5mm Increment | P 0.1mm Increment | P Dimension Tolerance | B 0.5mm Increment | H 0.1mm Increment | T 0.5mm Increment | E 0.5mm Increment (Taper only) | R | |||
Flat SFSST SFSSS | Sphere SPSST SPSSS | Taper R STSST STSSS | Tapered SXSST SXSSS | 1 | +0.008 +0.002 | 2.0~5.0 | 1.0~2.9 | 0 -0.01 | 1.0~10.0 | 1.1~3.0 | 1.0~10.0 | 0.5~5.0 | 0.2 |
2 | 4.0~10.0 | 1.0~4.0 | 1.0~30.0 | 2.1~7.0 | 1.0~20.0 | 0.2 | |||||||
3 | 6.0~10.0 | 1.5~6.0 | 3.1~8.0 | 0.3 | |||||||||
4 | +0.012 +0.004 | 8.0~10.0 | 2.0~7.0 | 4.1~9.0 | 0.4 |
Part Number | L 0.1mm Increment | P 0.01mm Increment | B 0.1mm Increment | H 0.01mm Increment | T 0.1mm Increment | E 0.5mm Increment (Taper only) | R | M | ||||||
TYPE | D Tolerance | P Tolerance | D | |||||||||||
Flat SFPST SFPSS | Sphere SPSST SPPSS | Taper R STPST | Tapered SXPSS | P +0.005 0 Q 0.002 R 0 -0.005 | P +0.005 0 Q 0.002 R 0 -0.005 | 2 | 0 1.0~10.0 | 1.00~4.00 | 1.0~30.0 | 2.10~7.00 | 1.0~20.0 | 0.5~5.0 | 0.2 | M2 |
3 | 1.50~6.00 | 3.10~8.00 | 0.2 | M3 | ||||||||||
4 | 2.00~7.00 | 4.10~9.00 | 0.4 | M4 |