We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPSQ-D[0.5-3/0.01]-L[3-30/0.1]
Description
Small Diameter/Flat/ Standard Tolerance
Stock availability:
On request
If you are inspecting MISUMI SFPSQ-D[0.5-3/0.01]-L[3-30/0.1], catch up with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of outcomes and particular attention to each customer. We esteem everyone, who worked with us - hence, our regular clients get the most helpful purchase conditions and discounts on the factory-made equipment market. Nowadays, there are more than 4500 such clients, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA works all over the earth Germany, United Kingdom, Malta, Congo, Jordan, Myanmar, Philippines, Georgia, Brazil, Palestine, Niger, Costa Rica, Burma, Rwanda, Chile, Suriname, Ecuador, Belize, China, Iran, Denmark, Tonga, Macedonia, Egypt, Bangladesh, Togo, Thailand, Djibouti, Central African Republic, Albania, Algeria, Finland, New Zealand, Malaysia, Iceland, Lithuania, India, Bosnia and Herzegovina, Namibia, Paraguay, Israel, United Arab Emirates, Mali, Armenia, Bulgaria, Indonesia. A well-built logistics network and a partnership network let us to dispatch our elements anywhere in the earth on-time without undermining product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of factory-made equipment.
All items from FAMAGA are guaranteed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are proud that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To get some advice or order, get in touch with us or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||||
Flat | Sphere | Tapered | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
?SK95 (ISO-TC90 Equiv.) | Treated Hardness: 50 ~ 58HRC | SFKT | SPKT | SXKT | SFST | SPST | STST | SXST | SFFPT | SPPT | STPT | SXFPT |
*EN 1.4301 Equiv. | - | SFKS | SPKS | SXKS | SFSS | SPSS | STSS | SXSS | SFPS | SPPS | STPS | SXFPS |
?EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | - | - | - | SFSXC | SPSXC | STSXC | SXSXC | SFPXC | SPPXC | STPXC | SXFPXC |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | - | - | SPSSG | - | - | - | - | - | - |
?EN 1.2344 Equiv. (SR Parts Polished) | Treated Hardness: 40 ~ 52HRC | - | - | - | - | SPSDG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKS | - | D1 | - | L5 |
Part Number | - | D | - | L | - | E | |
SPST SXST | - - | D1.5 D1.5 | - - | L8.5 L5.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | E | ||
Type | D Tol. | |||||||
SPPT SXFPT | P P | - - | D0.55 D2.82 | - - | L5.0 L5.0 | - | E2.5 | (Sphere) (Tapered) |
Part Number | D | d dim. Tolerance | L Selection | E | |||||||||
Flat SFKT SFKS | Sphere SPKT SPKS | Tapered SXKT SXKS | 1 | 0 -0.005 | 3 | 4 | 5 | 6 | 10 | 0.5 | |||
1.5 | 5 | 6 | 8 | ||||||||||
2 | 5 | 6 | 8 | 10 | 12 | 15 | |||||||
3 | 5 | 6 | 8 | 10 | 12 | 15 | 1 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFST SFSS SFSXC | Sphere SPST SPSS SPSXC SPSSG SPSDG | Taper R STST STSS STSXC | Tapered SXST SXSS SXSXC | 1.0~2.0 | 0 -0.005 | 3.0~30.0 | 0.5~2.5 | 0.2 |
2.1~3.0 | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | E 0.5mm Increment | R | ||||
Type | D Tolerance | |||||||
Flat SFFPT SFPS SFPXC | Sphere SPPT SPPS SPPXC | Taper R STPT STPS STPXC | Tapered SXFPT SXFPS SXFPXC | P +0.005 0 Q 0.002 R 0 -0.005 H 0 -0.01 | 0.50~1.00 | 3.0~30.0 | 0.5~2.5 | - |
1.01~2.00 | 3.0~30.0 | 0.2 | ||||||
2.01~3.00 | 0.4 |