We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPQTD16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1]
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
If you are pursuing MISUMI SFPQTD16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of goods and special attention to each user. We value everyone, who collaborated with us - so, our regular consumers pick up the most attractive purchase forms and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, United Arab Emirates, Malaysia, Oman, Eswatini, Andorra, Bahamas, South Korea, Singapore, Poland, Honduras, Netherlands, Afghanistan, Seychelles, Equatorial Guinea, Jamaica, Philippines, Laos, Syria, Togo, Switzerland, Serbia, Kyrgyzstan, Tajikistan, Iceland, Dominica, Mongolia, Haiti, Argentina, Fiji, Moldova, Mauritius, Norway, Pakistan, Ireland, Albania, Tunisia, Mauritania, Brunei, Mexico, Kiribati, Egypt, Finland, Morocco, Australia. A well-built logistics chains and a partnership network cheer us to deliver our items anywhere in the earth quickly without compromising product quality.
A specific source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the field of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically modern industrial equipment so as to stay on the top.
To inquire or book, call us by phone or write to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
Part Number | - | P | - | L | - | B |
JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | ||||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPQT SJPQT CJPQT | BB (Round) | ?6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | ?8 | M3 | ?147 | ?5 | ||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | ?676 | ?8 | ||||||||||||
10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | ?6 | M2 | - | 3 | 2.2 |
6 | ?6.50~10.00 | ?8 | M3 | ?147 | 5 | 3 | ||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | ?9.00~13.00 | 15 | M5 | ?676 | 8 | 3.5 | |||
8T | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | M5 | ?676 | 8 | 4 | ||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
16 | 17.00~25.00 | 12 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5(9)~10 | 2.0~10.0 | M2 | - | ?3 | 2.2 |
?6 | ?6.50~10.00 | ?6(9)~12 | 2.0~12.0 | M3 | ?147 | ?5 | 3 | |||
?6T | M2.6 | - | ?4 | |||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8(12)~16 | 2.0~15.0 | M5 | ?676 | ?8 | 3.5 | ||
?8T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | ?676 | ?8 | 4 | |||
10T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 5 | ||
12T | ?8(12)~18 | M4 | ?333 | ?6 | ||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
13T | ?8(14)~20 | M6 | 1156 | ?9 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
20T | 12(18)~30 | M6 | 1156 | ?9 |