We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPQNLD5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]-ML[5-15/1]
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
If you are seeking MISUMI SFPQNLD5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]-ML[5-15/1], catch up with FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are ages of experience, which are portrayed in the quality of products and special attention to each buyer. We admire everyone, who liased with us - therefore, our regular clients procure the most attractive purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such purchasers, and we constantly arrange new agreements. More than 700 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, France, Netherlands, Congo, Dominican Republic, Bulgaria, Oman, Belgium, Libya, Switzerland, Senegal, Egypt, Cape Verde, Kiribati, Cameroon, Singapore, Malawi, Tonga, Paraguay, Ukraine, Jordan, El Salvador, Andorra, Greece, Denmark, Ghana, Tanzania, Bangladesh, Mongolia, Malta, Nigeria, Finland, India, Ecuador, Argentina, Afghanistan, Kyrgyzstan, Kenya, Moldova, Peru, Iran. A well-built logistics system and a partnership network guide us to ship our goods anywhere in the world promptly without disreputing product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We propose into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this amount is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as stay in control.
To inquire or book, contact us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | ?3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | ?5 | M3 | ?147 | ?4.5 | |||||||||
?4 | -0.004 -0.012 | 5 | 6 | 7 | ?6 | M4 | ?333 | ?6 | ||||||||||||
?5 | 6 | 7 | 8 | 3 | M5 | ?676 | ?7.5 | |||||||||||||
?6 | 7 | 8 | 9 | 10 | ?8 | M6 | 1156 | ?9 | ||||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQN GJPQN SJPQN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | M4 | 333 | ?6 | 1.8 | |||
?5 | 5.50~8.00 | ?3 | M5 | 676 | ?7.5 | 2.2 | ||||
?6 | ?6.50~10.00 | ?8 | M6 | ?1156 | ?9 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | M8 | ?2803 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | ?5557 | 15 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8 | M12 | ?9702 | 18 | 5 | |||
16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | ?6 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | M5 | 676 | ?7.5 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | M6 | ?1156 | ?9 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | M8 | ?2803 | 12 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | M10 | ?5557 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | M12 | ?9702 | 18 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | ?4~12 | M4 | 333 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | ?5~15 | M5 | 676 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | ?6~18 | M6 | ?1156 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | ?8~24 | M8 | ?2803 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | M10 | ?5557 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | M12 | ?9702 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |