We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPNA16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1]
Description
Large Head/Threaded/P Configurable
Stock availability:
On request
If you are questing MISUMI SFPNA16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of products and individual attention to each user. We value everyone, who collaborated with us - so, our regular customers pick up the most attractive purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Denmark, Zimbabwe, Algeria, Lesotho, Madagascar, Papua New Guinea, Congo, South Korea, Senegal, United Arab Emirates, Guatemala, Kuwait, Cape Verde, Serbia, Finland, Suriname, Botswana, Samoa, Montenegro, Monaco, Guyana, Kenya, Yemen, Mongolia, Qatar, China, Dominica, Laos, Tajikistan, Angola, Hungary, Fiji, Nigeria, Belarus, Seychelles, Mauritania, Ukraine, Indonesia, Haiti, Syria, Niger, Swaziland, Mexico, Cyprus, Panama. A well-shaped logistics network and a partnership network assist us to conduct our goods anywhere in the earth immediately without compromising product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write a message to the online chat on our site. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
Type | Shape Code | Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPN | BB (Round) | JPN | A (Round) D (Diamond) | FPN | A (Round) D (Diamond) | FPNL | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPN | GFPN | GFPNL | |||||
EN 1.2510 Equiv. | - | - | - | - | BFPN | - | |||||
EN 1.4301 Equiv.* | - | - | SJPN | SJPN | SFPN | SFPNL | |||||
EN 1.4301 Equiv. | Hard Chrome Plating: Plating Thickness 3µm or more | Plating Hardness: 750HV ~ | - | HJPN | HFPN | - | |||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPN | CJPN | CFPN | CFPNL |
Part Number | - | P | - | L | - | B | - | ML | ||||
Type | Shape | D | ||||||||||
JPN | A | 3 | - | 5.20 | ||||||||
FPN | A | 5 | - | P6.00 | - | L5 | - | B4.0 | ||||
FPNL | A | 8 | - | P9.51 | - | L8 | - | B4.0 | - | ML8 |
Part Number | P Selection | L | B | ML | M (Coarse) | * Tightening Torque N • cm | m | (W) | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPN SJPN CJPN | BB (Round) | ?3 | -0.002 -0.008 | 3.5 | 4 | 4.5 | 5 | 6 | 2 | 5 | ?4.5 | ?3 | ?147 | 2 | 1.5 | |||||||
?4 | -0.004 -0.012 | 4.5 | 5 | 6 | 7 | 6 | ?6 | ?4 | ?333 | 3 | 1.8 | |||||||||||
?5 | 6 | 7 | 8 | 3 | ?7.5 | ?5 | ?676 | 2.2 | ||||||||||||||
?6 | 7 | 8 | 9 | 10 | 8 | ?9 | ?6 | 1156 | 3 | |||||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | 12 | ?8 | 2803 | 4 | 3.5 | ||||||||||
10 | 11 | 12 | 13 | 10 | 15 | 10 | 5557 | 4 |
Part Number | P 0.01mm Increment | L | B | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
JPN GJPN SJPN HJPN CJPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | ?4.5 | ?3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | ?6 | ?4 | 333 | 3 | 1.8 | |||
?5 | 5.50~8.00 | ?3 | ?7.5 | ?5 | 676 | 2.2 | |||||
?6 | ?6.50~10.00 | ?8 | ?9 | ?6 | ?1156 | 3 | |||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | 12 | ?8 | ?2803 | 4 | 3.5 | |||
10 | 11.00~15.00 | 10 | 15 | 10 | ?5557 | 4 | |||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8 | 18 | 12 | ?9702 | 5 | ||||
16 | 17.00~25.00 | 24 | 16 | 24108 | 5 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPN GFPN BFPN SFPN HFPN CFPN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 4.5 | ?3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | 6 | ?4 | 333 | 3 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | 7.5 | ?5 | 676 | 2.2 | ||||
?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | 9 | ?6 | ?1156 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | 12 | ?8 | ?2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 15 | 10 | ?5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 18 | 12 | ?9702 | 5 | |||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 24 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 30 | 20 | 46942 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | m | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | ||||||||
FPNL GFPNL SFPNL CFPNL | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 1.0~10.0 | 3~9 | 3 | 147 | 2 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 1.0~10.0 | ?4~12 | 4 | 333 | 3 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 1.0~10.0 | ?5~15 | 5 | 676 | 2.2 | ||||
?6 | ?6.50~10.00 | ?3~10 | 1.0~12.0 | ?6~18 | 6 | ?1156 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 1.0~15.0 | ?8~24 | 8 | ?2803 | 4 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | 10 | ?5557 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | 12 | ?9702 | 5 | |||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | 16 | 24108 | 5 | 7 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | 20 | 46942 | 9 |