We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPFNLA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]-ML[5-15/1]
Description
Large Flat Head/Threaded/P Configurable
Stock availability:
On request
If you are inspecting MISUMI SFPFNLA5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1]-ML[5-15/1], communicate with FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are years of experience, which are outlined in the quality of items and private attention to each consumer. We esteem everyone, who engaged with us - thus, our regular customers accept the most acceptable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, Ghana, Philippines, Malta, Slovenia, Croatia, Tanzania, Monaco, Guyana, Kenya, Oman, Indonesia, Lebanon, Suriname, El Salvador, Syria, Costa Rica, Cyprus, Tajikistan, Haiti, United States, Turkey, Qatar, Bangladesh, Afghanistan, Morocco, Albania, Estonia, Sudan, South Sudan, Burkina Faso, The Gambia, Guatemala, Central African Republic, Andorra, Georgia, Thailand, Djibouti, Brazil, Botswana, Jamaica, Serbia, Ukraine, Latvia, Madagascar. A well-shaped logistics chains and a partnership network allow us to conduct our products anywhere in the globe on-time without damaging product quality.
A particular source of honor for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are assured - we are responsible for the result of our work. Now, more than 10 million units of products have been supplied, and this quantity is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as not to lower the bar.
To consult or place an order, call us by phone or write to the online chat on our official website. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | |||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPFNB | JPFNA | FPFNA | FPFNLA | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPFNA | GFPFNA | GFPFNLA | |
EN 1.2510 Equiv. | - | - | - | BJPFNA | BFPFNA | - | |
EN 1.4301 Equiv.* | - | - | SJPFNB | SJPFNA | SFPFNA | SFPFNLA | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPFNB | - | CFPFNA | CFPFNLA |
Part Number | - | P | - | L | - | B | - | ML |
JPFNA3 FPFNA5 FPFNLA8 | - - - | 5.20 P7.80 P10.00 | - - | L8 L5 | - - | B4.0 B5.0 | - | ML8 |
P | h6 |
?3.50~6.00 | 0 -?0.008 |
?6.01~10.00 | 0 -?0.009 |
10.01~18.00 | 0 -?0.011 |
18.01~30.00 | 0 -?0.013 |
Part Number | P Selection | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | |||||||||
Type | D | D dim. Tolerance g6 | ||||||||||||||
JPFNB SJPFNB CJPFNB | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 3 | 0.5 | M3 | ?147 | ?4.5 | |||||
4 | -0.004 -0.012 | 5 | 6 | 8 | 4 | 1 | M4 | ?333 | ?6 | |||||||
5 | 6 | 8 | 9 | 3 | M5 | ?676 | ?7.5 | |||||||||
6 | 8 | 9 | 10 | 5 | M6 | 1156 | ?9 | |||||||||
8 | -0.005 -0.014 | 9 | 10 | 12 | 13 | 5 | 6 | 1.5 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
JPFNA GJPFNA BJPFNA SJPFNA | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?3 | 0.5 | ?M3 | 147 | ?4.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?4 | 1 | ?M4 | 333 | ?6 | ||
?5 | 5.50~8.00 | ?3 | ?M5 | 676 | ?7.5 | ||||
?6 | ?6.50~10.00 | ?5 | ?M6 | ?1156 | ?9 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | ?6 | 1.5 | ?M8 | ?2803 | 12 | |
10 | 11.00~15.00 | 10 | 2 | M10 | ?5557 | 15 | |||
12 | -0.006 -0.017 | 13.00~16.00 | ?8 | 20 | M12 | ?9702 | 18 | ||
16 | 17.00~25.00 | 25 | 3 | M16 | 24108 | 24 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 30 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNA GFPFNA BFPFNA SFPFNA CFPFNA | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | ?3.0~10.0 | 0.5 | ?M3 | 147 | ?4.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | ?4.0~10.0 | 1 | ?M4 | 333 | ?6 | |
?5 | 5.50~8.00 | ?3~10 | ?4.0~10.0 | ?M5 | 676 | ?7.5 | |||
?6 | ?6.50~10.00 | ?3~10 | ?4.0~12.0 | ?M6 | ?1156 | ?9 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | ?5.0~15.0 | 1.5 | ?M8 | ?2803 | 12 | |
10 | 11.00~15.00 | ?5~15 | ?6.0~20.0 | 2 | M10 | ?5557 | 15 | ||
12 | -0.006 -0.017 | 13.00~16.00 | ?8~15 | ?6.0~20.0 | M12 | ?9702 | 18 | ||
16 | 17.00~25.00 | ?8~20 | ?7.0~20.0 | 3 | M16 | 24108 | 24 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNLA GFPFNLA SFPFNLA CFPFNLA | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | ?3.0~10.0 | 3~9 | 0.5 | ?M3 | 147 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | ?4.0~10.0 | ?4~12 | 1 | ?M4 | 333 | |
?5 | 5.50~8.00 | ?3~10 | ?4.0~10.0 | ?5~15 | ?M5 | 676 | |||
?6 | ?6.50~10.00 | ?3~10 | ?4.0~12.0 | ?6~18 | ?M6 | ?1156 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | ?5.0~15.0 | ?8~24 | 1.5 | ?M8 | ?2803 | |
10 | 11.00~15.00 | ?5~15 | ?6.0~20.0 | 10~30 | 2 | M10 | ?5557 | ||
12 | -0.006 -0.017 | 13.00~16.00 | ?8~15 | ?6.0~20.0 | 12~30 | M12 | ?9702 | ||
16 | 17.00~25.00 | ?8~20 | ?7.0~20.0 | 16~40 | 3 | M16 | 24108 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | 20~40 | M20 | 46942 |