We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFPFNLA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]-ML[4-12/1]
Description
Large Flat Head/Threaded/P Configurable
Stock availability:
On request
If you are pursuing MISUMI SFPFNLA4-P[4.5-7/0.01]-L[2-8/1]-B[2-10/0.1]-ML[4-12/1], catch up with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are portrayed in the quality of products and personalseparate attention to each orderer. We admire everyone, who conspired with us - therefore, our regular purchasers obtain the most attractive purchase terms and discounts on the machine made streamlined equipment market. Nowadays, there are more than 4500 such consumers, and we constantly make new agreements. More than 700 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Madagascar, Malta, Croatia, Belgium, North Korea, Vietnam, Gambia, Turkmenistan, Bolivia, Bhutan, Bulgaria, Honduras, Uruguay, Burundi, Bangladesh, Algeria, Denmark, Bosnia and Herzegovina, Iraq, Moldova, Swaziland, Andorra, East Timor, Kazakhstan, New Zealand, Zambia, Nigeria, Mauritius, Ecuador, Israel, Antigua and Barbuda, Niger, Dominica, Cyprus, Tunisia, Kuwait, Kiribati, Guatemala, Namibia, Cameroon, Mongolia, Togo, Ghana, Montenegro. A well-elaborated logistics network and a partnership network guide us to dispatch our goods anywhere in the world promptly without discrediting product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the range of machine made streamlined equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been shipped, and this amount is rising every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as stay in control.
To request or book, phone us or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | |||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPFNB | JPFNA | FPFNA | FPFNLA | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | - | GJPFNA | GFPFNA | GFPFNLA | |
EN 1.2510 Equiv. | - | - | - | BJPFNA | BFPFNA | - | |
EN 1.4301 Equiv.* | - | - | SJPFNB | SJPFNA | SFPFNA | SFPFNLA | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPFNB | - | CFPFNA | CFPFNLA |
Part Number | - | P | - | L | - | B | - | ML |
JPFNA3 FPFNA5 FPFNLA8 | - - - | 5.20 P7.80 P10.00 | - - | L8 L5 | - - | B4.0 B5.0 | - | ML8 |
P | h6 |
?3.50~6.00 | 0 -?0.008 |
?6.01~10.00 | 0 -?0.009 |
10.01~18.00 | 0 -?0.011 |
18.01~30.00 | 0 -?0.013 |
Part Number | P Selection | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | |||||||||
Type | D | D dim. Tolerance g6 | ||||||||||||||
JPFNB SJPFNB CJPFNB | 3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | 3 | 0.5 | M3 | ?147 | ?4.5 | |||||
4 | -0.004 -0.012 | 5 | 6 | 8 | 4 | 1 | M4 | ?333 | ?6 | |||||||
5 | 6 | 8 | 9 | 3 | M5 | ?676 | ?7.5 | |||||||||
6 | 8 | 9 | 10 | 5 | M6 | 1156 | ?9 | |||||||||
8 | -0.005 -0.014 | 9 | 10 | 12 | 13 | 5 | 6 | 1.5 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
JPFNA GJPFNA BJPFNA SJPFNA | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?3 | 0.5 | ?M3 | 147 | ?4.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?4 | 1 | ?M4 | 333 | ?6 | ||
?5 | 5.50~8.00 | ?3 | ?M5 | 676 | ?7.5 | ||||
?6 | ?6.50~10.00 | ?5 | ?M6 | ?1156 | ?9 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | ?6 | 1.5 | ?M8 | ?2803 | 12 | |
10 | 11.00~15.00 | 10 | 2 | M10 | ?5557 | 15 | |||
12 | -0.006 -0.017 | 13.00~16.00 | ?8 | 20 | M12 | ?9702 | 18 | ||
16 | 17.00~25.00 | 25 | 3 | M16 | 24108 | 24 | |||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 30 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ML | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNA GFPFNA BFPFNA SFPFNA CFPFNA | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | ?3.0~10.0 | 0.5 | ?M3 | 147 | ?4.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | ?4.0~10.0 | 1 | ?M4 | 333 | ?6 | |
?5 | 5.50~8.00 | ?3~10 | ?4.0~10.0 | ?M5 | 676 | ?7.5 | |||
?6 | ?6.50~10.00 | ?3~10 | ?4.0~12.0 | ?M6 | ?1156 | ?9 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | ?5.0~15.0 | 1.5 | ?M8 | ?2803 | 12 | |
10 | 11.00~15.00 | ?5~15 | ?6.0~20.0 | 2 | M10 | ?5557 | 15 | ||
12 | -0.006 -0.017 | 13.00~16.00 | ?8~15 | ?6.0~20.0 | M12 | ?9702 | 18 | ||
16 | 17.00~25.00 | ?8~20 | ?7.0~20.0 | 3 | M16 | 24108 | 24 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | M20 | 46942 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | C | M (Coarse) | * Tightening Torque Ncm | ||
Type | D | D dim. Tolerance g6 | |||||||
FPFNLA GFPFNLA SFPFNLA CFPFNLA | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | ?3.0~10.0 | 3~9 | 0.5 | ?M3 | 147 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | ?4.0~10.0 | ?4~12 | 1 | ?M4 | 333 | |
?5 | 5.50~8.00 | ?3~10 | ?4.0~10.0 | ?5~15 | ?M5 | 676 | |||
?6 | ?6.50~10.00 | ?3~10 | ?4.0~12.0 | ?6~18 | ?M6 | ?1156 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | ?5.0~15.0 | ?8~24 | 1.5 | ?M8 | ?2803 | |
10 | 11.00~15.00 | ?5~15 | ?6.0~20.0 | 10~30 | 2 | M10 | ?5557 | ||
12 | -0.006 -0.017 | 13.00~16.00 | ?8~15 | ?6.0~20.0 | 12~30 | M12 | ?9702 | ||
16 | 17.00~25.00 | ?8~20 | ?7.0~20.0 | 16~40 | 3 | M16 | 24108 | ||
20 | -0.007 -0.020 | 22.00~30.00 | 10~20 | 10.0~20.0 | 20~40 | M20 | 46942 |