We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFKT-D1.5-L6
Description
Small Diameter/Flat/ Standard Tolerance
Stock availability:
On request
If you are seeking MISUMI SFKT-D1.5-L6, make contact with FAMAGA, the world's leading provider of mechanized equipment. Our company has advanced for more than ten years - these are years of experience, which are described in the quality of merchandises and particular attention to each consumer. We praise everyone, who engaged with us - therefore, our regular buyers obtain the most beneficial purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4500 such customers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA works all over the world Germany, United Kingdom, Honduras, Oman, Grenada, Guyana, Sri Lanka, Burundi, Cuba, Russia, East Timor, Lebanon, Egypt, Slovakia, Canada, Japan, Austria, Mexico, Saudi Arabia, Brunei, Iran, Angola, Mongolia, Finland, Latvia, Jamaica, Comoros, Libya, Kuwait, Liechtenstein, Sweden, Estonia, Benin, Belize, Cameroon, Mauritius, Malaysia, Switzerland, Qatar, Dominica, Peru, Poland, Belarus, Tanzania, United States, Albania, Suriname, Central African Republic. A well-built logistics system and a partnership network let us to ship our goods anywhere in the globe quickly without discrediting product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this amount is amounting every day. We are proud that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To ask a question or place an order, phone us or write a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||||
Flat | Sphere | Tapered | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
?SK95 (ISO-TC90 Equiv.) | Treated Hardness: 50 ~ 58HRC | SFKT | SPKT | SXKT | SFST | SPST | STST | SXST | SFFPT | SPPT | STPT | SXFPT |
*EN 1.4301 Equiv. | - | SFKS | SPKS | SXKS | SFSS | SPSS | STSS | SXSS | SFPS | SPPS | STPS | SXFPS |
?EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | - | - | - | SFSXC | SPSXC | STSXC | SXSXC | SFPXC | SPPXC | STPXC | SXFPXC |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | - | - | SPSSG | - | - | - | - | - | - |
?EN 1.2344 Equiv. (SR Parts Polished) | Treated Hardness: 40 ~ 52HRC | - | - | - | - | SPSDG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKS | - | D1 | - | L5 |
Part Number | - | D | - | L | - | E | |
SPST SXST | - - | D1.5 D1.5 | - - | L8.5 L5.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | E | ||
Type | D Tol. | |||||||
SPPT SXFPT | P P | - - | D0.55 D2.82 | - - | L5.0 L5.0 | - | E2.5 | (Sphere) (Tapered) |
Part Number | D | d dim. Tolerance | L Selection | E | |||||||||
Flat SFKT SFKS | Sphere SPKT SPKS | Tapered SXKT SXKS | 1 | 0 -0.005 | 3 | 4 | 5 | 6 | 10 | 0.5 | |||
1.5 | 5 | 6 | 8 | ||||||||||
2 | 5 | 6 | 8 | 10 | 12 | 15 | |||||||
3 | 5 | 6 | 8 | 10 | 12 | 15 | 1 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFST SFSS SFSXC | Sphere SPST SPSS SPSXC SPSSG SPSDG | Taper R STST STSS STSXC | Tapered SXST SXSS SXSXC | 1.0~2.0 | 0 -0.005 | 3.0~30.0 | 0.5~2.5 | 0.2 |
2.1~3.0 | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | E 0.5mm Increment | R | ||||
Type | D Tolerance | |||||||
Flat SFFPT SFPS SFPXC | Sphere SPPT SPPS SPPXC | Taper R STPT STPS STPXC | Tapered SXFPT SXFPS SXFPXC | P +0.005 0 Q 0.002 R 0 -0.005 H 0 -0.01 | 0.50~1.00 | 3.0~30.0 | 0.5~2.5 | - |
1.01~2.00 | 3.0~30.0 | 0.2 | ||||||
2.01~3.00 | 0.4 |