We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFKT-D1.5-L5
Description
Small Diameter/Flat/ Standard Tolerance
Stock availability:
On request
If you are looking for MISUMI SFKT-D1.5-L5, reach FAMAGA, the world's major company of streamlined equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and special attention to each client. We understand everyone, who conspired with us - thus, our regular clients receive the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 650 purchases are terminated per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Burma, Bhutan, Romania, Turkmenistan, Lesotho, Angola, France, Belize, Sudan, Honduras, Slovakia, Mauritania, Guinea, Liberia, Afghanistan, Austria, Netherlands, Senegal, Nepal, Jordan, Peru, Lithuania, Ghana, Cameroon, Paraguay, Comoros, Iran, Fiji, Central African Republic, Nigeria, Argentina, El Salvador, Philippines, Equatorial Guinea, Tonga, Kenya, Andorra, Uganda, Laos, Kyrgyzstan, Hungary, Vietnam, Moldova, Zambia, Uruguay, Dominica. A well-developed logistics link and a partnership network allow us to send our items anywhere in the world with no delay without undermining product quality.
A special source of repute for FAMAGA is its employees, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the sphere of factory-made equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is rising every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as stay in control.
To inquire or book, get in touch with us or write to the online chat on our official website. You can also direct a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material | Hardness | Type | ||||||||||
L Selectable | L Configurable | L Configurable and Tolerance Selectable | ||||||||||
Flat | Sphere | Tapered | Flat | Sphere | Taper R | Tapered | Flat | Sphere | Taper R | Tapered | ||
?SK95 (ISO-TC90 Equiv.) | Treated Hardness: 50 ~ 58HRC | SFKT | SPKT | SXKT | SFST | SPST | STST | SXST | SFFPT | SPPT | STPT | SXFPT |
*EN 1.4301 Equiv. | - | SFKS | SPKS | SXKS | SFSS | SPSS | STSS | SXSS | SFPS | SPPS | STPS | SXFPS |
?EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | - | - | - | SFSXC | SPSXC | STSXC | SXSXC | SFPXC | SPPXC | STPXC | SXFPXC |
EN 1.4301 Equiv. (SR Parts Polished) | - | - | - | - | - | SPSSG | - | - | - | - | - | - |
?EN 1.2344 Equiv. (SR Parts Polished) | Treated Hardness: 40 ~ 52HRC | - | - | - | - | SPSDG | - | - | - | - | - | - |
Part Number | - | D | - | L |
SPKS | - | D1 | - | L5 |
Part Number | - | D | - | L | - | E | |
SPST SXST | - - | D1.5 D1.5 | - - | L8.5 L5.0 | - | E1.0 | (Sphere) (Tapered) |
Part Number | - | D | - | L | - | E | ||
Type | D Tol. | |||||||
SPPT SXFPT | P P | - - | D0.55 D2.82 | - - | L5.0 L5.0 | - | E2.5 | (Sphere) (Tapered) |
Part Number | D | d dim. Tolerance | L Selection | E | |||||||||
Flat SFKT SFKS | Sphere SPKT SPKS | Tapered SXKT SXKS | 1 | 0 -0.005 | 3 | 4 | 5 | 6 | 10 | 0.5 | |||
1.5 | 5 | 6 | 8 | ||||||||||
2 | 5 | 6 | 8 | 10 | 12 | 15 | |||||||
3 | 5 | 6 | 8 | 10 | 12 | 15 | 1 |
Part Number | D 0.1mm Increment | d dim. Tolerance | L 0.5mm Increment | E 0.5mm Increment | R | |||
Flat SFST SFSS SFSXC | Sphere SPST SPSS SPSXC SPSSG SPSDG | Taper R STST STSS STSXC | Tapered SXST SXSS SXSXC | 1.0~2.0 | 0 -0.005 | 3.0~30.0 | 0.5~2.5 | 0.2 |
2.1~3.0 | 0.4 |
Part Number | D 0.01mm Increment | L 0.1mm Increment | E 0.5mm Increment | R | ||||
Type | D Tolerance | |||||||
Flat SFFPT SFPS SFPXC | Sphere SPPT SPPS SPPXC | Taper R STPT STPS STPXC | Tapered SXFPT SXFPS SXFPXC | P +0.005 0 Q 0.002 R 0 -0.005 H 0 -0.01 | 0.50~1.00 | 3.0~30.0 | 0.5~2.5 | - |
1.01~2.00 | 3.0~30.0 | 0.2 | ||||||
2.01~3.00 | 0.4 |