We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SFEPM8-P[5-9/0.01]-L[8-16/1]-B[2-15/0.1]-E[0.5-10/0.1]
Description
Feed Pins/With Shoulder/Standard
Stock availability:
On request
If you are questing MISUMI SFEPM8-P[5-9/0.01]-L[8-16/1]-B[2-15/0.1]-E[0.5-10/0.1], communicate with FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and individual attention to each consumer. We value everyone, who conspired with us - therefore, our regular customers receive the most beneficial purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4500 such purchasers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Vietnam, Bolivia, Japan, Peru, Namibia, Malaysia, Pakistan, Tanzania, Haiti, Iraq, Switzerland, El Salvador, Russia, Benin, Jamaica, Georgia, Romania, Thailand, Morocco, Liechtenstein, Guatemala, North Korea, Guyana, Philippines, Zambia, Eswatini, Brunei, Macedonia, Syria, Mali, Fiji, Niger, Armenia, Belarus, Comoros, Burkina Faso, India, Kuwait, Jordan, Tajikistan, Czech Republic, East Timor, Nepal, Estonia, Serbia. A advanced logistics network and a partnership network assist us to ship our goods anywhere in the planet with no delay without compromising product quality.
A specific source of good name for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only experts, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To consult or book, call us by phone or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Press Fit |
Round | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | FEPM |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | GFEPM |
EN 1.4301 Equiv. | - | - | SFEPM |
EN 1.4301 Equiv. | Hard Chrome Plating | Plating Hardness: 750HV ~ | HFEPM |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CFEPM |
Part Number | - | P | - | L | - | B | - | E |
FEPM5 | - | P3.50 | - | L5 | - | B6.0 | - | E4.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | H | Unit Price | |||||
Type | D | Round | |||||||||
EN 1.2510 Equiv. | EN 1.2510 Equiv. Hard Chrome Plating | EN 1.4301 Equiv. | EN 1.4301 Equiv. Hard Chrome Plating | EN 1.4125 Equiv. | |||||||
(Round) FEPM GFEPM SFEPM HFEPM CFEPM | 2 | 2.00~3.00 | 2~6 | 2.0~10.0 | 0.5~10.0 | 5 | |||||
3 | 2.00~5.00 | 3~6 | 2.0~10.0 | 6 | |||||||
4 | 2.00~5.00 | 4~8 | 2.0~10.0 | ||||||||
5 | 3.00~7.00 | 5~10 | 2.0~10.0 | 8 | |||||||
6 | 4.00~7.00 | 6~12 | 2.0~12.0 | ||||||||
8 | 5.00~9.00 | 8~16 | 2.0~15.0 | 11 | |||||||
10 | 6.00~11.00 | 10~20 | 2.0~20.0 | 13 |