We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SANSN5-35
Description
Adjusting Stopper Screws/Wrench Flat/L Selectable/Fine Thread
Stock availability:
On request
If you are looking for MISUMI SANSN5-35, catch up with FAMAGA, the world's principle provider of industrial equipment. Our company has worked for more than ten years - these are ages of experience, which are represented in the quality of outputs and particular attention to each user. We cherish everyone, who collaborated with us - thus, our regular purchasers accept the most beneficial purchase forms and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Finland, Romania, Tunisia, Italy, Bahamas, Tonga, Japan, Luxembourg, Niger, South Korea, Switzerland, Namibia, Nicaragua, Benin, Albania, Pakistan, Indonesia, Costa Rica, Croatia, Mozambique, Monaco, Guatemala, Panama, The Gambia, Estonia, Mexico, El Salvador, Philippines, Yemen, Peru, Azerbaijan, Seychelles, Eswatini, Madagascar, Malta, Samoa, Burkina Faso, Belarus, Iceland, Norway, Bolivia, Equatorial Guinea, Cape Verde, Kiribati, Nepal, East Timor. A well-developed logistics bond and a partnership network cheer us to ship our products anywhere in the earth with no delay without undermining product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the direction of manufacturing equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been provided, and this amount is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or order, contact us or write a message to the online chat on our official website. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Adjusting Stopper | Wrench Flats | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
Material | Surface Treatment | |||||
Fine | ANS | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANS | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - | |
Coarse | ANSN | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANSN | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - |
Part Number | - | L |
ANS6 SANSN10 | - - | 60 50 |
M | MxPitch | A | ?1 | SR | B | (C) | T | |
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 2.5 | 4 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 3 | 4 | 7 | 8.1 | 4 | |
5 | 5x0.5 | 5x0.8 | 4 | 5 | 8 | 9.2 | ||
6 | 6x0.75 | 6x1.0 | 5 | 5 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 6 | 6 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 8 | 8 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 10 | 10 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 14 | 14 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 17 | 17 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANS, ANSN | SANS, SANSN | |||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||
(Fine) ANS SANS (Coarse) ANSN SANSN | 3 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||
8 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | |||||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | |||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | |||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |