We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SANSN12-60
Description
Adjusting Stopper Screws/Wrench Flat/L Selectable/Fine Thread
Stock availability:
On request
If you are inspecting MISUMI SANSN12-60, make contact with FAMAGA, the world's principle retailer of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are represented in the quality of outputs and special attention to each consumer. We cherish everyone, who engaged with us - thus, our regular buyers obtain the most desirable purchase terms and discounts on the industrial equipment market. Today, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Afghanistan, Malaysia, Mongolia, Russia, Greece, Panama, Mozambique, Iran, Dominica, Guatemala, Bulgaria, Brunei, Mexico, Madagascar, Fiji, Burma, Azerbaijan, El Salvador, Finland, Monaco, East Timor, Singapore, Kuwait, Benin, Luxembourg, Poland, Haiti, Cape Verde, Albania, Liechtenstein, Comoros, Macedonia, Mauritius, Argentina, Nicaragua, Zambia, Latvia, Sweden, Suriname, Czech Republic, United Arab Emirates, Brazil, Egypt, Bolivia, South Korea, Hungary, Qatar, Ukraine. A well-shaped logistics system and a partnership network cheer us to send our units anywhere in the planet as soon as possible without compromising product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of manufacturing equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To consult or order, contact us or write a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Adjusting Stopper | Wrench Flats | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
Material | Surface Treatment | |||||
Fine | ANS | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANS | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - | |
Coarse | ANSN | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANSN | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - |
Part Number | - | L |
ANS6 SANSN10 | - - | 60 50 |
M | MxPitch | A | ?1 | SR | B | (C) | T | |
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 2.5 | 4 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 3 | 4 | 7 | 8.1 | 4 | |
5 | 5x0.5 | 5x0.8 | 4 | 5 | 8 | 9.2 | ||
6 | 6x0.75 | 6x1.0 | 5 | 5 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 6 | 6 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 8 | 8 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 10 | 10 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 14 | 14 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 17 | 17 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANS, ANSN | SANS, SANSN | |||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||
(Fine) ANS SANS (Coarse) ANSN SANSN | 3 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||
8 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | |||||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | |||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | |||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |