We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SANSN10-45
Description
Adjusting Stopper Screws/Wrench Flat/L Selectable/Fine Thread
Stock availability:
On request
If you are seeking MISUMI SANSN10-45, catch up with FAMAGA, the world's key vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are represented in the quality of outputs and personalseparate attention to each orderer. We cherish everyone, who joined with us - thus, our regular customers pick up the most beneficial purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such customers, and we constantly compose new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Brunei, United Arab Emirates, Greece, Georgia, Moldova, Bolivia, Afghanistan, Central African Republic, Costa Rica, Burkina Faso, Iran, Nepal, Indonesia, Swaziland, Angola, Malawi, Jordan, Jamaica, Benin, Fiji, Zimbabwe, Japan, Sweden, Egypt, Finland, Mexico, Liberia, Peru, Botswana, Burundi, Madagascar, Nigeria, Tajikistan, Slovakia, El Salvador, Namibia, Yemen, Mauritius, East Timor, Kazakhstan, Togo, Hungary, South Korea, Cape Verde, Comoros, Czech Republic, Vietnam, Armenia. A well-built logistics series and a partnership network cheer us to deliver our products anywhere in the world with no delay without discrediting product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this amount is rising every day. We are happy that consumers choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, contact us or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Adjusting Stopper | Wrench Flats | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
Material | Surface Treatment | |||||
Fine | ANS | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANS | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - | |
Coarse | ANSN | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANSN | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - |
Part Number | - | L |
ANS6 SANSN10 | - - | 60 50 |
M | MxPitch | A | ?1 | SR | B | (C) | T | |
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 2.5 | 4 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 3 | 4 | 7 | 8.1 | 4 | |
5 | 5x0.5 | 5x0.8 | 4 | 5 | 8 | 9.2 | ||
6 | 6x0.75 | 6x1.0 | 5 | 5 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 6 | 6 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 8 | 8 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 10 | 10 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 14 | 14 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 17 | 17 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANS, ANSN | SANS, SANSN | |||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||
(Fine) ANS SANS (Coarse) ANSN SANSN | 3 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||
8 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | |||||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | |||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | |||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |